Add the regulator supply properties needed by ADV7511 and ADV7533. The regulators are specified as optional properties since there can be boards which have a fixed supply directly routed to the pins, and these may not be modelled as regulator supplies. Cc: devicetree@xxxxxxxxxxxxxxx Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> --- v3: - Revert back to having a common avdd-supply property for the 1.8V supplies Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59..13d53bc 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -56,6 +56,15 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD + pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also powers + up the A2VDD pin. +- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on + ADV7511 and V3P3 on ADV7533. + +ADV7533 specific supplies: +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. Required nodes: -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
