Hi Archit,
Thank you for the patch.
On Tuesday 29 Nov 2016 11:37:42 Archit Taneja wrote:
> Maintain a table of regulator names expect by ADV7511 and ADV7533.
> Use regulator_bulk_* api to configure these.
>
> Initialize and enable the regulators during probe itself. Controlling
> these dynamically is left for later.
>
> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> ---
> v3:
> - Drop the additional 1.8V supply names
>
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 4 ++
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 79 +++++++++++++++++++++----
> 2 files changed, 74 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> b/drivers/gpu/drm/bridge/adv7511/adv7511.h index 992d76c..18ec627 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -12,6 +12,7 @@
> #include <linux/hdmi.h>
> #include <linux/i2c.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_mipi_dsi.h>
> @@ -329,6 +330,9 @@ struct adv7511 {
>
> struct gpio_desc *gpio_pd;
>
> + struct regulator_bulk_data *supplies;
> + int num_supplies;
num_supplies is always positive, you can make it an unsigned int.
> +
> /* ADV7533 DSI RX related params */
> struct device_node *host_node;
> struct mipi_dsi_device *dsi;
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 2177440..f123fbb
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -843,6 +843,51 @@ static int adv7511_bridge_attach(struct drm_bridge
> *bridge) * Probe & remove
> */
>
> +static const char * const adv7511_supply_names[] = {
> + "avdd",
> + "v3p3",
> +};
> +
> +static const char * const adv7533_supply_names[] = {
> + "avdd",
> + "v3p3",
> + "v1p2",
> +};
> +
> +static int adv7511_init_regulators(struct adv7511 *adv)
> +{
> + struct device *dev = &adv->i2c_main->dev;
> + const char * const *supply_names;
> + int i, ret;
Same comment for i.
Apart from that,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +
> + if (adv->type == ADV7511) {
> + supply_names = adv7511_supply_names;
> + adv->num_supplies = ARRAY_SIZE(adv7511_supply_names);
> + } else {
> + supply_names = adv7533_supply_names;
> + adv->num_supplies = ARRAY_SIZE(adv7533_supply_names);
> + }
> +
> + adv->supplies = devm_kcalloc(dev, adv->num_supplies,
> + sizeof(*adv->supplies), GFP_KERNEL);
> + if (!adv->supplies)
> + return -ENOMEM;
> +
> + for (i = 0; i < adv->num_supplies; i++)
> + adv->supplies[i].supply = supply_names[i];
> +
> + ret = devm_regulator_bulk_get(dev, adv->num_supplies, adv->supplies);
> + if (ret)
> + return ret;
> +
> + return regulator_bulk_enable(adv->num_supplies, adv->supplies);
> +}
> +
> +static void adv7511_uninit_regulators(struct adv7511 *adv)
> +{
> + regulator_bulk_disable(adv->num_supplies, adv->supplies);
> +}
> +
> static int adv7511_parse_dt(struct device_node *np,
> struct adv7511_link_config *config)
> {
> @@ -943,6 +988,7 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) if (!adv7511)
> return -ENOMEM;
>
> + adv7511->i2c_main = i2c;
> adv7511->powered = false;
> adv7511->status = connector_status_disconnected;
>
> @@ -960,13 +1006,21 @@ static int adv7511_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id) if (ret)
> return ret;
>
> + ret = adv7511_init_regulators(adv7511);
> + if (ret) {
> + dev_err(dev, "failed to init regulators\n");
> + return ret;
> + }
> +
> /*
> * The power down GPIO is optional. If present, toggle it from active
to
> * inactive to wake up the encoder.
> */
> adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> - if (IS_ERR(adv7511->gpio_pd))
> - return PTR_ERR(adv7511->gpio_pd);
> + if (IS_ERR(adv7511->gpio_pd)) {
> + ret = PTR_ERR(adv7511->gpio_pd);
> + goto uninit_regulators;
> + }
>
> if (adv7511->gpio_pd) {
> mdelay(5);
> @@ -974,12 +1028,14 @@ static int adv7511_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id) }
>
> adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> - if (IS_ERR(adv7511->regmap))
> - return PTR_ERR(adv7511->regmap);
> + if (IS_ERR(adv7511->regmap)) {
> + ret = PTR_ERR(adv7511->regmap);
> + goto uninit_regulators;
> + }
>
> ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> if (ret)
> - return ret;
> + goto uninit_regulators;
> dev_dbg(dev, "Rev. %d\n", val);
>
> if (adv7511->type == ADV7511)
> @@ -989,7 +1045,7 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) else
> ret = adv7533_patch_registers(adv7511);
> if (ret)
> - return ret;
> + goto uninit_regulators;
>
> regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
edid_i2c_addr);
> regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> @@ -999,10 +1055,11 @@ static int adv7511_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
>
> adv7511_packet_disable(adv7511, 0xffff);
>
> - adv7511->i2c_main = i2c;
> adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> - if (!adv7511->i2c_edid)
> - return -ENOMEM;
> + if (!adv7511->i2c_edid) {
> + ret = -ENOMEM;
> + goto uninit_regulators;
> + }
>
> if (adv7511->type == ADV7533) {
> ret = adv7533_init_cec(adv7511);
> @@ -1049,6 +1106,8 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) adv7533_uninit_cec(adv7511);
> err_i2c_unregister_edid:
> i2c_unregister_device(adv7511->i2c_edid);
> +uninit_regulators:
> + adv7511_uninit_regulators(adv7511);
>
> return ret;
> }
> @@ -1062,6 +1121,8 @@ static int adv7511_remove(struct i2c_client *i2c)
> adv7533_uninit_cec(adv7511);
> }
>
> + adv7511_uninit_regulators(adv7511);
> +
> drm_bridge_remove(&adv7511->bridge);
>
> adv7511_audio_exit(adv7511);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
