On 07.11.2016 02:45, Inki Dae wrote:
>
> 2016년 10월 26일 21:36에 Andrzej Hajda 이(가) 쓴 글:
>> Use core helpers to generate infoframes and generate vendor frame if necessary.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/exynos/exynos_hdmi.c | 141 ++++++++++-------------------------
>> drivers/gpu/drm/exynos/regs-hdmi.h | 2 +
>> 2 files changed, 42 insertions(+), 101 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index e8fb6ef..1bb2df7 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -47,19 +47,6 @@
>>
>> #define HOTPLUG_DEBOUNCE_MS 1100
>>
>> -/* AVI header and aspect ratio */
>> -#define HDMI_AVI_VERSION 0x02
>> -#define HDMI_AVI_LENGTH 0x0d
>> -
>> -/* AUI header info */
>> -#define HDMI_AUI_VERSION 0x01
>> -#define HDMI_AUI_LENGTH 0x0a
>> -
>> -/* AVI active format aspect ratio */
>> -#define AVI_SAME_AS_PIC_ASPECT_RATIO 0x08
>> -#define AVI_4_3_CENTER_RATIO 0x09
>> -#define AVI_16_9_CENTER_RATIO 0x0a
>> -
>> enum hdmi_type {
>> HDMI_TYPE13,
>> HDMI_TYPE14,
>> @@ -131,7 +118,6 @@ struct hdmi_context {
>> bool dvi_mode;
>> struct delayed_work hotplug_work;
>> struct drm_display_mode current_mode;
>> - u8 cea_video_id;
>> const struct hdmi_driver_data *drv_data;
>>
>> void __iomem *regs;
>> @@ -681,6 +667,13 @@ static inline void hdmi_reg_writev(struct hdmi_context *hdata, u32 reg_id,
>> }
>> }
>>
>> +static inline void hdmi_reg_write_buf(struct hdmi_context *hdata, u32 reg_id,
>> + u8 *buf, int size)
>> +{
>> + for (reg_id = hdmi_map_reg(hdata, reg_id); size; --size, reg_id += 4)
>> + writel(*buf++, hdata->regs + reg_id);
>> +}
>> +
>> static inline void hdmi_reg_writemask(struct hdmi_context *hdata,
>> u32 reg_id, u32 value, u32 mask)
>> {
>> @@ -762,93 +755,50 @@ static int hdmi_clk_set_parents(struct hdmi_context *hdata, bool to_phy)
>> return ret;
>> }
>>
>> -static u8 hdmi_chksum(struct hdmi_context *hdata,
>> - u32 start, u8 len, u32 hdr_sum)
>> -{
>> - int i;
>> -
>> - /* hdr_sum : header0 + header1 + header2
>> - * start : start address of packet byte1
>> - * len : packet bytes - 1 */
>> - for (i = 0; i < len; ++i)
>> - hdr_sum += 0xff & hdmi_reg_read(hdata, start + i * 4);
>> -
>> - /* return 2's complement of 8 bit hdr_sum */
>> - return (u8)(~(hdr_sum & 0xff) + 1);
>> -}
>> -
>> -static void hdmi_reg_infoframe(struct hdmi_context *hdata,
>> - union hdmi_infoframe *infoframe)
>> +static void hdmi_reg_infoframes(struct hdmi_context *hdata)
>> {
>> - u32 hdr_sum;
>> - u8 chksum;
>> - u8 ar;
>> + union hdmi_infoframe frm;
>> + u8 buf[25];
>> + int ret;
>>
>> if (hdata->dvi_mode) {
>> - hdmi_reg_writeb(hdata, HDMI_VSI_CON,
>> - HDMI_VSI_CON_DO_NOT_TRANSMIT);
>> hdmi_reg_writeb(hdata, HDMI_AVI_CON,
>> HDMI_AVI_CON_DO_NOT_TRANSMIT);
>> + hdmi_reg_writeb(hdata, HDMI_VSI_CON,
>> + HDMI_VSI_CON_DO_NOT_TRANSMIT);
>> hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_NO_TRAN);
>> return;
>> }
>>
>> - switch (infoframe->any.type) {
>> - case HDMI_INFOFRAME_TYPE_AVI:
>> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi,
>> + &hdata->current_mode);
>> + if (ret >= 0)
> Seems above condition is not clear becuase drm_hdmi_avi_infoframe_from_display_mode function returns 0 or negative value.
So it means 'there is no error', I can change it to '!ret' or 'ret == 0'
if you prefer, I have just used '>= 0' to be more concise with next
error check.
>
>> + ret = hdmi_avi_infoframe_pack(&frm.avi, buf, sizeof(buf));
>> + if (ret > 0) {
>> hdmi_reg_writeb(hdata, HDMI_AVI_CON, HDMI_AVI_CON_EVERY_VSYNC);
> I think above code should be called when drm_hdmi_avi_infoframe_from_display_mode function returned 0 and the value from hdmi_avi_infoframe_pack function is more than 1.
Why do you think 'more than 1' is better than 'more than 0' in this
case? hdmi_avi_infoframe_pack returns length of generated frame or
negative value in case of error,
so any positive value is OK, there is no special meaning for '1'.
>
>> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->any.type);
>> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1,
>> - infoframe->any.version);
>> - hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->any.length);
>> - hdr_sum = infoframe->any.type + infoframe->any.version +
>> - infoframe->any.length;
>> -
>> - /* Output format zero hardcoded ,RGB YBCR selection */
>> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(1), 0 << 5 |
>> - AVI_ACTIVE_FORMAT_VALID |
>> - AVI_UNDERSCANNED_DISPLAY_VALID);
>> -
>> - /*
>> - * Set the aspect ratio as per the mode, mentioned in
>> - * Table 9 AVI InfoFrame Data Byte 2 of CEA-861-D Standard
>> - */
>> - ar = hdata->current_mode.picture_aspect_ratio;
>> - switch (ar) {
>> - case HDMI_PICTURE_ASPECT_4_3:
>> - ar |= AVI_4_3_CENTER_RATIO;
>> - break;
>> - case HDMI_PICTURE_ASPECT_16_9:
>> - ar |= AVI_16_9_CENTER_RATIO;
>> - break;
>> - case HDMI_PICTURE_ASPECT_NONE:
>> - default:
>> - ar |= AVI_SAME_AS_PIC_ASPECT_RATIO;
>> - break;
>> - }
>> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(2), ar);
>> + hdmi_reg_write_buf(hdata, HDMI_AVI_HEADER0, buf, ret);
>> + } else {
>> + DRM_INFO("%s: invalid AVI infoframe (%d)\n", __func__, ret);
> If drm_hdmi_avi_infoframe_from_display_mode function returns 0 on success, then above message will be printed out. Seems not reasonable.
If drm_hdmi_avi_infoframe_from_display_mode returns 0, then
hdmi_avi_infoframe_pack is called and if the latter
fails (practically impossible) this message will be printed which is
correct behavior.
The same answer is for your next comments.
Regards
Andrzej
>
>> + }
>>
>> - hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(4), hdata->cea_video_id);
>> + ret = drm_hdmi_vendor_infoframe_from_display_mode(&frm.vendor.hdmi,
>> + &hdata->current_mode);
>> + if (ret >= 0)
> Ditto.
>
>> + ret = hdmi_vendor_infoframe_pack(&frm.vendor.hdmi, buf,
>> + sizeof(buf));
>> + if (ret > 0) {
>> + hdmi_reg_writeb(hdata, HDMI_VSI_CON, HDMI_VSI_CON_EVERY_VSYNC);
>> + hdmi_reg_write_buf(hdata, HDMI_VSI_HEADER0, buf, ret);
> Also above codes should be called when drm_hdmi_vendor_infoframe_from_display_mode function returned 0 and the value from hdmi_vendor_infoframe_pack function is more than 1.
>
>> + }
>>
>> - chksum = hdmi_chksum(hdata, HDMI_AVI_BYTE(1),
>> - infoframe->any.length, hdr_sum);
>> - DRM_DEBUG_KMS("AVI checksum = 0x%x\n", chksum);
>> - hdmi_reg_writeb(hdata, HDMI_AVI_CHECK_SUM, chksum);
>> - break;
>> - case HDMI_INFOFRAME_TYPE_AUDIO:
>> - hdmi_reg_writeb(hdata, HDMI_AUI_CON, 0x02);
>> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->any.type);
>> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1,
>> - infoframe->any.version);
>> - hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->any.length);
>> - hdr_sum = infoframe->any.type + infoframe->any.version +
>> - infoframe->any.length;
>> - chksum = hdmi_chksum(hdata, HDMI_AUI_BYTE(1),
>> - infoframe->any.length, hdr_sum);
>> - DRM_DEBUG_KMS("AUI checksum = 0x%x\n", chksum);
>> - hdmi_reg_writeb(hdata, HDMI_AUI_CHECK_SUM, chksum);
>> - break;
>> - default:
>> - break;
>> + ret = hdmi_audio_infoframe_init(&frm.audio);
>> + if (ret >= 0) {
> Ditto.
>
>> + frm.audio.channels = 2;
>> + ret = hdmi_audio_infoframe_pack(&frm.audio, buf, sizeof(buf));
>> + }
>> + if (ret > 0) {
>> + hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_EVERY_VSYNC);
>> + hdmi_reg_write_buf(hdata, HDMI_AUI_HEADER0, buf, ret);
> Also above codes should be called when hdmi_audio_infoframe_init function returned 0 and the value from hdmi_audio_infoframe_pack function is more than 1.
>
>> }
>> }
>>
>> @@ -1127,8 +1077,6 @@ static void hdmi_start(struct hdmi_context *hdata, bool start)
>>
>> static void hdmi_conf_init(struct hdmi_context *hdata)
>> {
>> - union hdmi_infoframe infoframe;
>> -
>> /* disable HPD interrupts from HDMI IP block, use GPIO instead */
>> hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
>> HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
>> @@ -1164,15 +1112,7 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
>> hdmi_reg_writeb(hdata, HDMI_V13_AUI_CON, 0x02);
>> hdmi_reg_writeb(hdata, HDMI_V13_ACR_CON, 0x04);
>> } else {
>> - infoframe.any.type = HDMI_INFOFRAME_TYPE_AVI;
>> - infoframe.any.version = HDMI_AVI_VERSION;
>> - infoframe.any.length = HDMI_AVI_LENGTH;
>> - hdmi_reg_infoframe(hdata, &infoframe);
>> -
>> - infoframe.any.type = HDMI_INFOFRAME_TYPE_AUDIO;
>> - infoframe.any.version = HDMI_AUI_VERSION;
>> - infoframe.any.length = HDMI_AUI_LENGTH;
>> - hdmi_reg_infoframe(hdata, &infoframe);
>> + hdmi_reg_infoframes(hdata);
>>
>> /* enable AVI packet every vsync, fixes purple line problem */
>> hdmi_reg_writemask(hdata, HDMI_CON_1, 2, 3 << 5);
>> @@ -1458,7 +1398,6 @@ static void hdmi_mode_set(struct drm_encoder *encoder,
>> "INTERLACED" : "PROGRESSIVE");
>>
>> drm_mode_copy(&hdata->current_mode, m);
>> - hdata->cea_video_id = drm_match_cea_mode(mode);
>> }
>>
>> static void hdmi_set_refclk(struct hdmi_context *hdata, bool on)
>> diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h
>> index 169667a..a0507dc 100644
>> --- a/drivers/gpu/drm/exynos/regs-hdmi.h
>> +++ b/drivers/gpu/drm/exynos/regs-hdmi.h
>> @@ -361,9 +361,11 @@
>>
>> /* AUI bit definition */
>> #define HDMI_AUI_CON_NO_TRAN (0 << 0)
>> +#define HDMI_AUI_CON_EVERY_VSYNC (1 << 1)
>>
>> /* VSI bit definition */
>> #define HDMI_VSI_CON_DO_NOT_TRANSMIT (0 << 0)
>> +#define HDMI_VSI_CON_EVERY_VSYNC (1 << 1)
>>
>> /* HDCP related registers */
>> #define HDMI_HDCP_SHA1(n) HDMI_CORE_BASE(0x7000 + 4 * (n))
>>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
