Re: [PATCH] drm/exynos/hdmi: refactor infoframe code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2016년 10월 26일 21:36에 Andrzej Hajda 이(가) 쓴 글:
> Use core helpers to generate infoframes and generate vendor frame if necessary.
> 
> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/exynos/exynos_hdmi.c | 141 ++++++++++-------------------------
>  drivers/gpu/drm/exynos/regs-hdmi.h   |   2 +
>  2 files changed, 42 insertions(+), 101 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index e8fb6ef..1bb2df7 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -47,19 +47,6 @@
>  
>  #define HOTPLUG_DEBOUNCE_MS		1100
>  
> -/* AVI header and aspect ratio */
> -#define HDMI_AVI_VERSION		0x02
> -#define HDMI_AVI_LENGTH			0x0d
> -
> -/* AUI header info */
> -#define HDMI_AUI_VERSION		0x01
> -#define HDMI_AUI_LENGTH			0x0a
> -
> -/* AVI active format aspect ratio */
> -#define AVI_SAME_AS_PIC_ASPECT_RATIO	0x08
> -#define AVI_4_3_CENTER_RATIO		0x09
> -#define AVI_16_9_CENTER_RATIO		0x0a
> -
>  enum hdmi_type {
>  	HDMI_TYPE13,
>  	HDMI_TYPE14,
> @@ -131,7 +118,6 @@ struct hdmi_context {
>  	bool				dvi_mode;
>  	struct delayed_work		hotplug_work;
>  	struct drm_display_mode		current_mode;
> -	u8				cea_video_id;
>  	const struct hdmi_driver_data	*drv_data;
>  
>  	void __iomem			*regs;
> @@ -681,6 +667,13 @@ static inline void hdmi_reg_writev(struct hdmi_context *hdata, u32 reg_id,
>  	}
>  }
>  
> +static inline void hdmi_reg_write_buf(struct hdmi_context *hdata, u32 reg_id,
> +				      u8 *buf, int size)
> +{
> +	for (reg_id = hdmi_map_reg(hdata, reg_id); size; --size, reg_id += 4)
> +		writel(*buf++, hdata->regs + reg_id);
> +}
> +
>  static inline void hdmi_reg_writemask(struct hdmi_context *hdata,
>  				 u32 reg_id, u32 value, u32 mask)
>  {
> @@ -762,93 +755,50 @@ static int hdmi_clk_set_parents(struct hdmi_context *hdata, bool to_phy)
>  	return ret;
>  }
>  
> -static u8 hdmi_chksum(struct hdmi_context *hdata,
> -			u32 start, u8 len, u32 hdr_sum)
> -{
> -	int i;
> -
> -	/* hdr_sum : header0 + header1 + header2
> -	* start : start address of packet byte1
> -	* len : packet bytes - 1 */
> -	for (i = 0; i < len; ++i)
> -		hdr_sum += 0xff & hdmi_reg_read(hdata, start + i * 4);
> -
> -	/* return 2's complement of 8 bit hdr_sum */
> -	return (u8)(~(hdr_sum & 0xff) + 1);
> -}
> -
> -static void hdmi_reg_infoframe(struct hdmi_context *hdata,
> -			union hdmi_infoframe *infoframe)
> +static void hdmi_reg_infoframes(struct hdmi_context *hdata)
>  {
> -	u32 hdr_sum;
> -	u8 chksum;
> -	u8 ar;
> +	union hdmi_infoframe frm;
> +	u8 buf[25];
> +	int ret;
>  
>  	if (hdata->dvi_mode) {
> -		hdmi_reg_writeb(hdata, HDMI_VSI_CON,
> -				HDMI_VSI_CON_DO_NOT_TRANSMIT);
>  		hdmi_reg_writeb(hdata, HDMI_AVI_CON,
>  				HDMI_AVI_CON_DO_NOT_TRANSMIT);
> +		hdmi_reg_writeb(hdata, HDMI_VSI_CON,
> +				HDMI_VSI_CON_DO_NOT_TRANSMIT);
>  		hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_NO_TRAN);
>  		return;
>  	}
>  
> -	switch (infoframe->any.type) {
> -	case HDMI_INFOFRAME_TYPE_AVI:
> +	ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi,
> +			&hdata->current_mode);
> +	if (ret >= 0)

Seems above condition is not clear becuase drm_hdmi_avi_infoframe_from_display_mode function returns 0 or negative value.

> +		ret = hdmi_avi_infoframe_pack(&frm.avi, buf, sizeof(buf));
> +	if (ret > 0) {
>  		hdmi_reg_writeb(hdata, HDMI_AVI_CON, HDMI_AVI_CON_EVERY_VSYNC);

I think above code should be called when drm_hdmi_avi_infoframe_from_display_mode function returned 0 and the value from hdmi_avi_infoframe_pack function is more than 1.

> -		hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->any.type);
> -		hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1,
> -				infoframe->any.version);
> -		hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->any.length);
> -		hdr_sum = infoframe->any.type + infoframe->any.version +
> -			  infoframe->any.length;
> -
> -		/* Output format zero hardcoded ,RGB YBCR selection */
> -		hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(1), 0 << 5 |
> -			AVI_ACTIVE_FORMAT_VALID |
> -			AVI_UNDERSCANNED_DISPLAY_VALID);
> -
> -		/*
> -		 * Set the aspect ratio as per the mode, mentioned in
> -		 * Table 9 AVI InfoFrame Data Byte 2 of CEA-861-D Standard
> -		 */
> -		ar = hdata->current_mode.picture_aspect_ratio;
> -		switch (ar) {
> -		case HDMI_PICTURE_ASPECT_4_3:
> -			ar |= AVI_4_3_CENTER_RATIO;
> -			break;
> -		case HDMI_PICTURE_ASPECT_16_9:
> -			ar |= AVI_16_9_CENTER_RATIO;
> -			break;
> -		case HDMI_PICTURE_ASPECT_NONE:
> -		default:
> -			ar |= AVI_SAME_AS_PIC_ASPECT_RATIO;
> -			break;
> -		}
> -		hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(2), ar);
> +		hdmi_reg_write_buf(hdata, HDMI_AVI_HEADER0, buf, ret);
> +	} else {
> +		DRM_INFO("%s: invalid AVI infoframe (%d)\n", __func__, ret);

If drm_hdmi_avi_infoframe_from_display_mode function returns 0 on success, then above message will be printed out. Seems not reasonable.

> +	}
>  
> -		hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(4), hdata->cea_video_id);
> +	ret = drm_hdmi_vendor_infoframe_from_display_mode(&frm.vendor.hdmi,
> +			&hdata->current_mode);
> +	if (ret >= 0)

Ditto.

> +		ret = hdmi_vendor_infoframe_pack(&frm.vendor.hdmi, buf,
> +				sizeof(buf));
> +	if (ret > 0) {
> +		hdmi_reg_writeb(hdata, HDMI_VSI_CON, HDMI_VSI_CON_EVERY_VSYNC);
> +		hdmi_reg_write_buf(hdata, HDMI_VSI_HEADER0, buf, ret);

Also above codes should be called when drm_hdmi_vendor_infoframe_from_display_mode function returned 0 and the value from hdmi_vendor_infoframe_pack function is more than 1.

> +	}
>  
> -		chksum = hdmi_chksum(hdata, HDMI_AVI_BYTE(1),
> -					infoframe->any.length, hdr_sum);
> -		DRM_DEBUG_KMS("AVI checksum = 0x%x\n", chksum);
> -		hdmi_reg_writeb(hdata, HDMI_AVI_CHECK_SUM, chksum);
> -		break;
> -	case HDMI_INFOFRAME_TYPE_AUDIO:
> -		hdmi_reg_writeb(hdata, HDMI_AUI_CON, 0x02);
> -		hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->any.type);
> -		hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1,
> -				infoframe->any.version);
> -		hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->any.length);
> -		hdr_sum = infoframe->any.type + infoframe->any.version +
> -			  infoframe->any.length;
> -		chksum = hdmi_chksum(hdata, HDMI_AUI_BYTE(1),
> -					infoframe->any.length, hdr_sum);
> -		DRM_DEBUG_KMS("AUI checksum = 0x%x\n", chksum);
> -		hdmi_reg_writeb(hdata, HDMI_AUI_CHECK_SUM, chksum);
> -		break;
> -	default:
> -		break;
> +	ret = hdmi_audio_infoframe_init(&frm.audio);
> +	if (ret >= 0) {

Ditto.

> +		frm.audio.channels = 2;
> +		ret = hdmi_audio_infoframe_pack(&frm.audio, buf, sizeof(buf));
> +	}
> +	if (ret > 0) {
> +		hdmi_reg_writeb(hdata, HDMI_AUI_CON, HDMI_AUI_CON_EVERY_VSYNC);
> +		hdmi_reg_write_buf(hdata, HDMI_AUI_HEADER0, buf, ret);

Also above codes should be called when hdmi_audio_infoframe_init function returned 0 and the value from hdmi_audio_infoframe_pack function is more than 1.

>  	}
>  }
>  
> @@ -1127,8 +1077,6 @@ static void hdmi_start(struct hdmi_context *hdata, bool start)
>  
>  static void hdmi_conf_init(struct hdmi_context *hdata)
>  {
> -	union hdmi_infoframe infoframe;
> -
>  	/* disable HPD interrupts from HDMI IP block, use GPIO instead */
>  	hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
>  		HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
> @@ -1164,15 +1112,7 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
>  		hdmi_reg_writeb(hdata, HDMI_V13_AUI_CON, 0x02);
>  		hdmi_reg_writeb(hdata, HDMI_V13_ACR_CON, 0x04);
>  	} else {
> -		infoframe.any.type = HDMI_INFOFRAME_TYPE_AVI;
> -		infoframe.any.version = HDMI_AVI_VERSION;
> -		infoframe.any.length = HDMI_AVI_LENGTH;
> -		hdmi_reg_infoframe(hdata, &infoframe);
> -
> -		infoframe.any.type = HDMI_INFOFRAME_TYPE_AUDIO;
> -		infoframe.any.version = HDMI_AUI_VERSION;
> -		infoframe.any.length = HDMI_AUI_LENGTH;
> -		hdmi_reg_infoframe(hdata, &infoframe);
> +		hdmi_reg_infoframes(hdata);
>  
>  		/* enable AVI packet every vsync, fixes purple line problem */
>  		hdmi_reg_writemask(hdata, HDMI_CON_1, 2, 3 << 5);
> @@ -1458,7 +1398,6 @@ static void hdmi_mode_set(struct drm_encoder *encoder,
>  		"INTERLACED" : "PROGRESSIVE");
>  
>  	drm_mode_copy(&hdata->current_mode, m);
> -	hdata->cea_video_id = drm_match_cea_mode(mode);
>  }
>  
>  static void hdmi_set_refclk(struct hdmi_context *hdata, bool on)
> diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h
> index 169667a..a0507dc 100644
> --- a/drivers/gpu/drm/exynos/regs-hdmi.h
> +++ b/drivers/gpu/drm/exynos/regs-hdmi.h
> @@ -361,9 +361,11 @@
>  
>  /* AUI bit definition */
>  #define HDMI_AUI_CON_NO_TRAN		(0 << 0)
> +#define HDMI_AUI_CON_EVERY_VSYNC	(1 << 1)
>  
>  /* VSI bit definition */
>  #define HDMI_VSI_CON_DO_NOT_TRANSMIT	(0 << 0)
> +#define HDMI_VSI_CON_EVERY_VSYNC	(1 << 1)
>  
>  /* HDCP related registers */
>  #define HDMI_HDCP_SHA1(n)		HDMI_CORE_BASE(0x7000 + 4 * (n))
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux