On 2016-05-30 23:58, Javier Martinez Canillas wrote:
Hello Inki,
On 04/05/2016 04:27 AM, Inki Dae wrote:
This patch adds HW trigger support on i80 mode.
Until now, Exynos DRM only supported SW trigger which was set
SWTRGCMD bit of TRIGCON register by CPU to transfer scanout
buffer to Display bus device or panel.
With this patch, the transmission to Display bus device or
panel will be initiated by FIMD controller.
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
---
There is a regression for the Exynos5800 Peach Pi Chromebook display
due
this patch. The display is blank and I noticed that it only happens
when
HW start trigger is enabled, but works with SW trigger (as it was
before).
So for example with the following diff on top of v4.7-rc1, display
works
again. Do you have any hints about what could be the issue?
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 0444d7fc400d..8c62830e9514 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -171,7 +171,7 @@ static struct fimd_driver_data
exynos5420_fimd_driver_data = {
.lcdblk_vt_shift = 24,
.lcdblk_bypass_shift = 15,
.lcdblk_mic_bypass_shift = 11,
- .trg_type = I80_HW_TRG,
.has_shadowcon = 1,
.has_vidoutcon = 1,
.has_vtsel = 1,
Best regards,
On a related note, my Exynos5250 Chromebook (snow) has stopped working
as well since -rc1 has landed. I haven't had time to bisect it yet, but
the symptoms are vaguely similar (bright white screen).
I'm happy to test patches.
Thanks,
M.
--
Who you jivin' with that Cosmik Debris?
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
