Re: [PATCH 11/16] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pratyush,

On 3/30/21 8:33 PM, Pratyush Yadav wrote:
> The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
> have up to 32 threads but the current driver only supports using one. So
> add an entry for that one thread.

If you are absolutely sure that the other threads are not going to be
used, then:
Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>

but I would consider adding the other threads if there is a chance that
the cs2rx will need to support it in the future.

> Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> ---
>  drivers/dma/ti/k3-psil-j721e.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
> index 7580870ed746..19ffa31e6dc6 100644
> --- a/drivers/dma/ti/k3-psil-j721e.c
> +++ b/drivers/dma/ti/k3-psil-j721e.c
> @@ -58,6 +58,14 @@
>  		},					\
>  	}
>  
> +#define PSIL_CSI2RX(x)					\
> +	{						\
> +		.thread_id = x,				\
> +		.ep_config = {				\
> +			.ep_type = PSIL_EP_NATIVE,	\
> +		},					\
> +	}
> +
>  /* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
>  static struct psil_ep j721e_src_ep_map[] = {
>  	/* SA2UL */
> @@ -138,6 +146,8 @@ static struct psil_ep j721e_src_ep_map[] = {
>  	PSIL_PDMA_XY_PKT(0x4707),
>  	PSIL_PDMA_XY_PKT(0x4708),
>  	PSIL_PDMA_XY_PKT(0x4709),
> +	/* CSI2RX */
> +	PSIL_CSI2RX(0x4940),
>  	/* CPSW9 */
>  	PSIL_ETHERNET(0x4a00),
>  	/* CPSW0 */
> 

-- 
Péter



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux