Hi, This series adds support for CSI2 capture on J721E. It includes some fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY driver, and finally adds the TI CSI2RX wrapper driver. Tested on TI's J721E with OV5640 sensor. Paul Kocialkowski (1): phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes Pratyush Yadav (15): phy: cdns-dphy: Prepare for Rx support phy: cdns-dphy: Allow setting mode phy: cdns-dphy: Add Rx support media: cadence: csi2rx: Add external DPHY support media: cadence: csi2rx: Soft reset the streams before starting capture media: cadence: csi2rx: Set the STOP bit when stopping a stream media: cadence: csi2rx: Fix stream data configuration media: cadence: csi2rx: Turn subdev power on before starting stream media: cadence: csi2rx: Add wrappers for subdev calls dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX dt-bindings: media: Add DT bindings for TI CSI2RX driver media: ti-vpe: csi2rx: Add CSI2RX support dt-bindings: phy: Convert Cadence DPHY binding to YAML dt-bindings: phy: cdns,dphy: make clocks optional dt-bindings: phy: cdns,dphy: add power-domains property .../devicetree/bindings/media/ti,csi2rx.yaml | 70 ++ .../devicetree/bindings/phy/cdns,dphy.txt | 20 - .../devicetree/bindings/phy/cdns,dphy.yaml | 52 + MAINTAINERS | 7 + drivers/dma/ti/k3-psil-j721e.c | 10 + drivers/media/platform/Kconfig | 11 + drivers/media/platform/cadence/cdns-csi2rx.c | 269 ++++- drivers/media/platform/ti-vpe/Makefile | 1 + drivers/media/platform/ti-vpe/ti-csi2rx.c | 964 ++++++++++++++++++ drivers/phy/cadence/cdns-dphy.c | 407 +++++++- include/linux/phy/phy-mipi-dphy.h | 13 + 11 files changed, 1754 insertions(+), 70 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c -- 2.30.0
