On 11/1/07, Mike Christie <michaelc@xxxxxxxxxxx> wrote: > > Yeah, the iscsi bits looks fine. You will have a /dev/sdX for the nic > and one of the HBA. > > When you start multipath, multipath should then create one multipath > device from those two scsi ones. > That makes sense. Thanks for the confirmation. > > > > I'm following the instructions on Red Hat's KB to setup the > > multipath.conf file. The modprobes were successful, the service > > started, but... > > > > # multipath -v2 > > error calling out /sbin/scsi_id -g -u -s /block/sda > > So are you asking about the errors from /dev/sda being accessed by > multipath, or are you looking for help on adding the iscsi disks to a > multipath device or both :) > Both, I guess. I'm following the Red Hat how-to and I'm getting that error instead of getting a successful output. If there's an answer for why I'm getting the error, or an answer for how to fix my multipathd, I'm open to either one at this point. :) I attempted to put sda in my blacklist (per the Red Hat instructions) but still received the same error message about sda (the local disk). Thanks, Scott -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
