Device-mapper multipathing in RHEL 4 http://kbase.redhat.com/faq/FAQ_51_7170.shtm I can (and have) setup a NIC based iSCSI SAN connection. I can (and have) setup an HBA based iSCSI SAN connection. Now I'm trying to get a machine to connect using multipath with both a NIC and an HBA. What are the prerequisites that I should have running before I attempt to go through the above knowledge base procedure? I put IPs on both the NIC and HBA on the SAN network. The SAN is showing both IPs as trying to access the volume in question. iscsi-ls only shows 1 device (/dev/sdb), and it's taking the path through the NIC to reach the SAN. I can verify this by watching the SAN volume to see which of the IP addresses is sending traffic. Should my HBA show up as another device (/dev/sdc) before I start attempting to multipath? Or is multipathd going to link both NIC and HBA to the /dev/sdb device? Thanks, Scott -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
