Hi Christophe, I noticed a failure in multipath-tools-0.4.2 when executing the following scenario. i) Run multipathd & multipath with 1 of 2 paths in the system available. ii)activate the other path. iii) run multipath again. Expect the newly inserted path to be incorporated into the original path groups. Does not happen. Traced it to a problem in the pgcmp2 function. Patch below should fix it. Also in step iii) above running multipath with a parameter (conf->dev) will not include the additional path into the particular mp because the select_alias function not called in the coalesce_paths function so the strncmp(mpp->alias,conf->dev,....) in main will always fail. Patch below should fix it. Also while testing with a modified scsi_debug driver (to expose multiple paths to the same device) noticed that sysfs vendor name for the scsi_debug device is "Linux " which fails to match with a "Linux" vendor name in the conf name and so device specific settings are not picked up. Think it is a good idea to chomp off trailing whitespace from vendor and product names. See patches below. Regards, Ramesh. "Views expressed are mine, and not those of Intel Corporation" diff -r /home/rcaushik/multipath-tools-0.4.2/libmultipath/hwtable.c multipath-tools-0.4.2/libmultipath/hwtable.c 11a12,13 > int strcmp_chomp(char *str1, char *str2); > 20c22 < strcmp(hwe->vendor, vendor) == 0 && --- > strcmp_chomp(hwe->vendor, vendor) == 0 && 22c24 < strcmp(hwe->product, product) == 0)) --- > strcmp_chomp(hwe->product, product) == 0)) 58a61,64 > int strcmp_chomp(char *str1, char *str2) > { > int i; > char s1[PARAMS_SIZE],s2[PARAMS_SIZE]; 59a66,76 > if(!str1 || !str2) > return 1; > strncpy(s1,str1,PARAMS_SIZE); > strncpy(s2,str2,PARAMS_SIZE); > > for(i=strlen(s1)-1;i >=0 && isspace(s1[i]); --i) ; > s1[++i]='\0'; > for(i=strlen(s2)-1;i >=0 && isspace(s2[i]); --i) ; > s2[++i]='\0'; > return(strcmp(s1,s2)); > } diff -r /home/rcaushik/multipath-tools-0.4.2/multipath/main.c multipath-tools-0.4.2/multipath/main.c 405c405 < --- > select_alias(mpp); 672c672 < break; --- > /* break; */