Hi Vincent, On Fri, Oct 23, 2015 at 01:47:56PM +0000, Vincent Cuissard wrote: > Hi Rob, > > > Le 23 oct. 2015 à 15:18, Rob Herring <robh@xxxxxxxxxx> a écrit : > > > >> On Fri, Oct 23, 2015 at 7:23 AM, Vincent Cuissard <cuissard@xxxxxxxxxxx> wrote: > >> Align NFC bindgins to use marvell instead of mrvl. > >> > >> Signed-off-by: Vincent Cuissard <cuissard@xxxxxxxxxxx> > >> --- > >> Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt | 12 ++++++------ > >> drivers/nfc/nfcmrvl/i2c.c | 2 +- > >> drivers/nfc/nfcmrvl/spi.c | 2 +- > >> drivers/nfc/nfcmrvl/uart.c | 2 +- > >> 4 files changed, 9 insertions(+), 9 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt > >> index 41058fc..0f95924 100644 > >> --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt > >> +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt > >> @@ -2,9 +2,9 @@ > >> > >> Required properties: > >> - compatible: Should be: > >> - - "mrvl,nfc-uart" for UART devices > >> - - "mrvl,nfc-i2c" for I2C devices > >> - - "mrvl,nfc-spi" for SPI devices > >> + - "marvell,nfc-uart" for UART devices > >> + - "marvell,nfc-i2c" for I2C devices > >> + - "marvell,nfc-spi" for SPI devices > > > > There is no point in changing these and doing so breaks backwards compatibility. > > There is no break since these 2 drivers are new. In the same patchset I first set mrvl and replace it to marvell since I figured out that this is the name for all other Marvell drivers. > I agree the i2c and spi drivers are new, but not the uart one. That one should be supported in a backward compatible way. Cheers, Samuel. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
