On Wed, Oct 21, 2015 at 7:56 AM, WingMan Kwok <w-kwok2@xxxxxx> wrote:
> On TI's Keystone platforms, several peripherals such as the
> gbe ethernet switch, 10gbe ethernet switch and PCIe controller
> require the use of a SerDes for converting SoC parallel data into
> serialized data that can be output over a high-speed electrical
> interface, and also converting high-speed serial input data
> into parallel data that can be processed by the SoC. The
> SerDeses used by those peripherals, though they may be different,
> are largely similar in functionality and setup.
>
> This patch provides a SerDes phy driver implementation that can be
> used by the above mentioned peripheral drivers to configure their
> respective SerDeses.
>
> Signed-off-by: WingMan Kwok <w-kwok2@xxxxxx>
> ---
> Documentation/devicetree/bindings/phy/ti-phy.txt | 239 +++
For the binding:
Acked-by: Rob Herring <robh@xxxxxxxxxx>
One other comment:
> + if (of_device_is_compatible(np, "ti,keystone-serdes-gbe")) {
> + sc->phy_type = KSERDES_PHY_SGMII;
> + } else if (of_device_is_compatible(np, "ti,keystone-serdes-xgbe")) {
> + sc->phy_type = KSERDES_PHY_XGE;
> + } else if (of_device_is_compatible(np, "ti,keystone-serdes-pcie")) {
> + sc->phy_type = KSERDES_PHY_PCIE;
> + } else {
> + dev_err(dev, "unknown phy type\n");
> + return -EINVAL;
> + }
Use the match data to set the type:
> +static const struct of_device_id kserdes_of_match[] = {
> + { .compatible = "ti,keystone-serdes-gbe" },
> + { .compatible = "ti,keystone-serdes-pcie" },
> + { .compatible = "ti,keystone-serdes-xgbe" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, kserdes_of_match);
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
