On R8A7790, GPIO banks 1 and 2 are missing pins 30 and 31. Correct the "gpio-ranges" properties of the corresponding device nodes. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> --- This patch is against the 'renesas-devel-20151019-v4.3-rc6' of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7790.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Index: renesas/arch/arm/boot/dts/r8a7790.dtsi =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi +++ renesas/arch/arm/boot/dts/r8a7790.dtsi @@ -143,7 +143,7 @@ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 32 32>; + gpio-ranges = <&pfc 0 32 30>; #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; @@ -156,7 +156,7 @@ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&pfc 0 64 32>; + gpio-ranges = <&pfc 0 64 30>; #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
