Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On 10.09.2015, at 17:48, Noralf Trønnes <noralf@xxxxxxxxxxx> wrote:
> 
> This looks interesting.
> But there's a challenge with the uart1 and the 8250 driver.
> 
> Phil Elwell has this to say:
> This means that that UART1 isn't an exact clone of a 8250 UART.
> In a particular, the clock divisor is calculated differently.
> A standard 8250 derives the baud rate as clock/(divisor16),
> whereas the BCM2835 mini UART uses clock/(divisor8). This means
> that if you want to use the standard driver then you need to lie
> about the clock frequency, providing a value is twice the real
> value, in order for a suitable divisor to be calculated.
> 
> Ref: https://github.com/raspberrypi/linux/pull/1008#issuecomment-139234607
> 
> So either we need a new uart1 driver or a doubled clock freq. somehow.

Found out the same thing and communicated it to Eric - not 
knowing about the different divider…

Martin--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux