From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> The BCM2835 contains 3 auxiliar devices: * spi1 * spi2 * uart1 All of those 3 devices are enabled/disabled via a shared register, which is set by default to be disabled. Access to this register needs to get serialized. So after several iterations of discussions with the following ideas: * syscon - device tree should describe HW not drivers to use - 'compatiblity = "brcm,bcm2835-aux-enable", "syscon";' is not acceptable * regulator - it is not necessarily a regulator or a power gate that is implemented in HW, so it is not valid to use this framework The recommendation was made to create a new minimal API in soc just for access to this shared enable/disable register. This patch-series implements: * the bcm2835-auxiliar device enable/disable api in soc. * the bcm2835-auxiliar spi device driver The uart1 device driver (ns16550 based) is not implemented so far but would be using the same API. Both spi and uart drivers can run with shared interrupts, so there is no need for an interrupt-controller to get implemented. Martin Sperl (6): soc: bcm2835: auxiliar devices enable infrastructure ARM: bcm2835: add DT for the bcm2835 auxiliar devices dt/bindings: bcm2835: add binding documentation for bcm2835-aux spi: bcm2835: new driver implementing auxiliar spi1/spi2 on the bcm2835 soc ARM: bcm2835: enable building of spi-bcm2835aux driver in default config dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices .../bindings/soc/bcm/brcm,bcm2835-aux.txt | 27 + .../bindings/spi/brcm,bcm2835-aux-spi.txt | 47 ++ arch/arm/boot/dts/bcm2835.dtsi | 37 ++ arch/arm/configs/bcm2835_defconfig | 1 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/bcm/Kconfig | 11 + drivers/soc/bcm/Makefile | 1 + drivers/soc/bcm/bcm2835-aux.c | 154 ++++++ drivers/spi/Kconfig | 12 + drivers/spi/Makefile | 1 + drivers/spi/spi-bcm2835aux.c | 514 ++++++++++++++++++++ include/linux/soc/bcm/bcm2835-aux.h | 23 + 13 files changed, 830 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt create mode 100644 drivers/soc/bcm/Kconfig create mode 100644 drivers/soc/bcm/Makefile create mode 100644 drivers/soc/bcm/bcm2835-aux.c create mode 100644 drivers/spi/spi-bcm2835aux.c create mode 100644 include/linux/soc/bcm/bcm2835-aux.h -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html