[PATCH v3] of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: David Daney <david.daney@xxxxxxxxxx>

It is perfectly legitimate for a PCI device to have an
PCI_INTERRUPT_PIN value of zero.  This happens if the device doesn't
use interrupts, or on PCIe devices, where only MSI/MSI-X are
supported.

Silence the annoying "of_irq_parse_pci() failed with rc=-19" error
messages by moving the printing code into of_irq_parse_pci(), and only
emitting the message for cases where PCI_INTERRUPT_PIN == 0 is not the
cause for an early exit.

Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---

Changes in v3: Also print the message for failures in
of_irq_parse_raw() (also suggested by Frank Rowand).

Changes in v2: Move the print function in to of_irq_parse_pci() at a
common error exit point (as suggested by Frank Rowand).


 drivers/of/of_pci_irq.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index 1710d9d..2306313 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -38,8 +38,8 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 	 */
 	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
 	if (rc != 0)
-		return rc;
-	/* No pin, exit */
+		goto err;
+	/* No pin, exit with no error message. */
 	if (pin == 0)
 		return -ENODEV;
 
@@ -53,8 +53,10 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 			ppnode = pci_bus_to_OF_node(pdev->bus);
 
 			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
+			if (ppnode == NULL) {
+				rc = -EINVAL;
+				goto err;
+			}
 		} else {
 			/* We found a P2P bridge, check if it has a node */
 			ppnode = pci_device_to_OF_node(ppdev);
@@ -86,7 +88,13 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 	out_irq->args[0] = pin;
 	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
 	laddr[1] = laddr[2] = cpu_to_be32(0);
-	return of_irq_parse_raw(laddr, out_irq);
+	rc = of_irq_parse_raw(laddr, out_irq);
+	if (rc)
+		goto err;
+	return 0;
+err:
+	dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_pci);
 
@@ -105,10 +113,8 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
 	int ret;
 
 	ret = of_irq_parse_pci(dev, &oirq);
-	if (ret) {
-		dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret);
+	if (ret)
 		return 0; /* Proper return code 0 == NO_IRQ */
-	}
 
 	return irq_create_of_mapping(&oirq);
 }
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux