Hi Ramakrishna,
On Sun, Sep 6, 2015 at 8:23 PM, Ramakrishna Pallala
<ramakrishna.pallala@xxxxxxxxx> wrote:
> Add new charger driver support for BQ24261 charger IC.
>
> BQ24261 charger driver relies on extcon notifications to get the
> charger cable type and based on that it will set the charging parameters.
>
> Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@xxxxxxxxx>
> Signed-off-by: Jennt TC <jenny.tc@xxxxxxxxx>
> ---
> .../devicetree/bindings/power/bq24261.txt | 37 +
> drivers/power/Kconfig | 6 +
> drivers/power/Makefile | 1 +
> drivers/power/bq24261_charger.c | 1208 ++++++++++++++++++++
[..]
> +static int bq24261_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> + struct power_supply_config charger_cfg = {};
> + struct bq24261_charger *chip;
> + int ret;
> + enum bq2426x_model model;
> +
> + adapter = to_i2c_adapter(client->dev.parent);
Please also check if you really need to call to_i2c_adapter() twice.
--
Best regards, Klimov Alexey
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
