On Wed, Sep 09, 2015 at 09:27:06AM +0900, Krzysztof Kozlowski wrote:
> On 09.09.2015 09:12, Andreas Dannenberg wrote:
> > Extend the bq2425x charger's device tree documentation to cover the
> > bq24250 and bq24257 devices as well as recent feature additions.
> >
> > Signed-off-by: Andreas Dannenberg <dannenberg@xxxxxx>
>
> Hi,
>
> Thanks for updates. Everything pointed previous looks good. After
> looking at Ramakrishna Pallala's (Cc-ed) patch ("power: bq24261_charger:
> Add support for TI BQ24261 charger") I have only one comment below.
Thanks for all your efforts and time checking those patches!
>
> > ---
> > .../devicetree/bindings/power/bq24257.txt | 21 -------
> > .../devicetree/bindings/power/bq2425x.txt | 70 ++++++++++++++++++++++
> > 2 files changed, 70 insertions(+), 21 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/power/bq24257.txt
> > create mode 100644 Documentation/devicetree/bindings/power/bq2425x.txt
> >
> > diff --git a/Documentation/devicetree/bindings/power/bq24257.txt b/Documentation/devicetree/bindings/power/bq24257.txt
> > deleted file mode 100644
> > index 5c9d394..0000000
> > --- a/Documentation/devicetree/bindings/power/bq24257.txt
> > +++ /dev/null
> > @@ -1,21 +0,0 @@
> > -Binding for TI bq24257 Li-Ion Charger
> > -
> > -Required properties:
> > -- compatible: Should contain one of the following:
> > - * "ti,bq24257"
> > -- reg: integer, i2c address of the device.
> > -- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
> > -- ti,charge-current: integer, maximum charging current in uA.
> > -- ti,termination-current: integer, charge will be terminated when current in
> > - constant-voltage phase drops below this value (in uA).
> > -
> > -Example:
> > -
> > -bq24257 {
> > - compatible = "ti,bq24257";
> > - reg = <0x6a>;
> > -
> > - ti,battery-regulation-voltage = <4200000>;
> > - ti,charge-current = <1000000>;
> > - ti,termination-current = <50000>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/power/bq2425x.txt b/Documentation/devicetree/bindings/power/bq2425x.txt
> > new file mode 100644
> > index 0000000..3e171c3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/bq2425x.txt
> > @@ -0,0 +1,70 @@
> > +Binding for TI bq2425x Li-Ion Charger
> > +
> > +Required properties:
> > +- compatible: Should contain one of the following:
> > + * "ti,bq24250"
> > + * "ti,bq24251"
> > + * "ti,bq24257"
> > +- reg: integer, i2c address of the device.
> > +- stat-gpios: GPIO used for the devices STAT_IN pin. Alternatively the pin can
> > + also be defined through the standard interrupt definition properties (see
> > + optional properties section below). Only use one method.
> > +- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
> > +- ti,charge-current: integer, maximum charging current in uA.
> > +- ti,termination-current: integer, charge will be terminated when current in
> > + constant-voltage phase drops below this value (in uA).
> > +
> > +Optional properties:
> > +- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin.
> > + This pin is not available on all devices however it should be used if
> > + possible as this is the recommended way to obtain the charger's input PG
> > + state. If this pin is not specified a software-based approach for PG
> > + detection is used.
> > +- ti,current-limit: The maximum current to be drawn from the charger's input
> > + (in uA). If this property is not specified a USB D+/D- signal based charger
> > + type detection is used (if available) and the input limit current is set
> > + accordingly. If the D+/D- based detection is not available on a given device
> > + a default of 500,000 is used (=500mA).
>
> I understand this is different property than "ti,charge-current:
> integer, default charging current (in mA)" from bq24261_charger patch?
Correct this is what "ti,current-limit" is for. And I borrowed that
definition from bq2415x_charger.c where it's used in the same context.
The reason for this property to exist is for systems where the external
power supply does more than just charging the battery, such as supplying
the system while it's charging or after it has finished charging. All
this only makes sense of course if the "ti,current-limit" is larger than
"ti,charge-current".
And if you see a few lines above the bq24257 driver also has a
"ti,charge-current" property. And yes this is what actually controls how
much current is delivered to the battery.
> This one is for setting limit on current drawn from the charger and the
> bq24261's is to limit current delivered to battery?
The bq24261 driver only exposes a "ti,charge-current" property which is
used in accordance with how other drivers use it. And it also supports
setting the input current limit but only automatically and not via DT.
Regards,
--
Andreas Dannenberg
Texas Instruments Inc
>
> Best regards,
> Krzysztof
>
> > +- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If
> > + not specified a default of 6,5000,000 (=6.5V) is used.
> > +- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic
> > + power path management (in uV). If not specified a default of 4,360,000
> > + (=4.36V) is used.
> > +- ti,safety-timer-2x-enable: If this property is set to 1 the device's safety
> > + timer is extended (slowed down) by a factor of two. Setting this property
> > + to 0 or not providing it will leave the safety timer at its default
> > + setting.
> > +- interrupt-parent: Should be the phandle for the interrupt controller. Use in
> > + conjunction with "interrupts" and only in case "stat-gpios" is not used.
> > +- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in
> > + conjunction with "interrupt-parent" and only in case "stat-gpios" is not
> > + used.
> > +
> > +Example:
> > +
> > +bq24257 {
> > + compatible = "ti,bq24257";
> > + reg = <0x6a>;
> > + stat-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
> > + pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> > +
> > + ti,battery-regulation-voltage = <4200000>;
> > + ti,charge-current = <1000000>;
> > + ti,termination-current = <50000>;
> > +};
> > +
> > +Example:
> > +
> > +bq24250 {
> > + compatible = "ti,bq24250";
> > + reg = <0x6a>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
> > +
> > + ti,battery-regulation-voltage = <4200000>;
> > + ti,charge-current = <500000>;
> > + ti,termination-current = <50000>;
> > + ti,current-limit = <900000>;
> > + ti,ovp-voltage = <9500000>;
> > + ti,in-dpm-voltage = <4440000>;
> > +};
> >
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
