Hi Marek, Having some compile issues...see below On 08/21/2015 04:20 AM, Marek Vasut wrote:
From: Graham Moore <grmoore@xxxxxxxxxxxxxxxxxxxxx> Add support for the Cadence QSPI controller. This controller is present in the Altera SoCFPGA SoCs and this driver has been tested on the Cyclone V SoC. Signed-off-by: Graham Moore <grmoore@xxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Marek Vasut <marex@xxxxxxx>
[...]
+static int cqspi_set_protocol(struct spi_nor *nor, enum spi_protocol proto) +{ + struct cqspi_flash_pdata *f_pdata = nor->priv; + + switch (proto) { + case SPI_PROTO_1_1_1: + case SPI_PROTO_1_1_2: + case SPI_PROTO_1_1_4: + case SPI_PROTO_1_2_2: + case SPI_PROTO_1_4_4: + f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; + break; + case SPI_PROTO_2_2_2: + f_pdata->inst_width = CQSPI_INST_TYPE_DUAL; + break; + case SPI_PROTO_4_4_4: + f_pdata->inst_width = CQSPI_INST_TYPE_QUAD; + break; + default: + return -EINVAL; + } + + switch (proto) { + case SPI_PROTO_1_1_1: + case SPI_PROTO_1_1_2: + case SPI_PROTO_1_1_4: + f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; + break; + case SPI_PROTO_1_2_2: + case SPI_PROTO_2_2_2: + f_pdata->addr_width = CQSPI_INST_TYPE_DUAL; + break; + case SPI_PROTO_1_4_4: + case SPI_PROTO_4_4_4: + f_pdata->addr_width = CQSPI_INST_TYPE_QUAD; + break; + default: + return -EINVAL; + } + + return 0; +} +
I think you have some other patches in your tree, the above doesn't compile on l2-mtd/master:
~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:57: warning: ‘enum spi_protocol’ declared inside parameter list [enabled by default] ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:57: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:70: error: parameter 2 (‘proto’) has incomplete type ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:701:12: error: function declaration isn’t a prototype [-Werror=strict-prototypes] ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c: In function ‘cqspi_set_protocol’: ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:706:7: error: ‘SPI_PROTO_1_1_1’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:706:7: note: each undeclared identifier is reported only once for each function it appears in ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:707:7: error: ‘SPI_PROTO_1_1_2’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:708:7: error: ‘SPI_PROTO_1_1_4’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:709:7: error: ‘SPI_PROTO_1_2_2’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:710:7: error: ‘SPI_PROTO_1_4_4’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:713:7: error: ‘SPI_PROTO_2_2_2’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:716:7: error: ‘SPI_PROTO_4_4_4’ undeclared (first use in this function) ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c: In function ‘cqspi_setup_flash’: ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:1087:6: error: ‘struct spi_nor’ has no member named ‘dn’ ~/l2-mtd/drivers/mtd/spi-nor/cadence-quadspi.c:1096:6: error: ‘struct spi_nor’ has no member named ‘set_protocol’
[...] Regards, Graham -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html