On 20/08/15 08:46, Chee Nouk Phoo wrote:
> From: Chee Nouk Phoon <cnphoon@xxxxxxxxxx>
>
> Altera Modular ADC is soft IP that wraps the hardened ADC block in a Max1
> device. It can be configured to dual ADC mode that supports two channel
> synchronous sampling or independent single ADCs. ADC sampled values will be
> written into memory slots in sequence determined by a user configurable
> sequencer block.
>
> This patch adds device tree binding for Altera Modular ADC driver
>
> Signed-off-by: Chee Nouk Phoon <cnphoon@xxxxxxxxxx>
> ---
> .../bindings/iio/adc/altr,modular-adc.txt | 63 ++++++++++++++++++++
> 1 files changed, 63 insertions(+), 0 deletions(-)
> create mode 100755 Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
> new file mode 100755
> index 0000000..4106cb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/altr,modular-adc.txt
> @@ -0,0 +1,63 @@
> +Altera Modular (Dual) ADC
> +
> +This binding document describes both Altera Modular ADC and Altera Modular Dual
> +ADC. Both options can be configured during generation time in Qsys. This driver
> +only support standard sequencer with Avalon-MM sample storage with up to 64
> +memory slots.
> +
> +Required properties:
> +- compatible: must be one of the following strings
> + "altr,modular-adc": single ADC configuration
> + "altr,modular-dual-adc": dual ADC configuration
> +
> +- reg: Address and length of the register set for the device. It contains the
> + information of registers in the same order as described by reg-names
> +
> +- reg-names: Should contain the reg names
> + "sequencer_csr": register region for adc sequencer block
> + "sample_store_csr": register region for sample store block
> +
> +- interrupts: interrupt line for ADC
> +
> +- altr,adc-mode : ADC configuration
> + 1: single ADC mode
> + 2: dual ADC mode
> +
> +- altr,adc-slot-count : specify number of conversion slot in use
> +
> +- altr,adc<ADC index>-slot-sequence-<slot index>: specify ADC channel
> + conversion sequence
> + <ADC index>: instantiated ADC number
> + <slot index>: slot index for ADC memory slot
> +
> +- altr,adc-number : specify ADC number when single ADC mode is selected
> + 1: 1st ADC
> + 2: 2nd ACD
> +
> +Example: single ADC
> +modular_adc_0: adc@0x20000200 {
> + compatible = "altr,modular-adc";
> + reg = <0x20000000 0x00000008>,
> + <0x20000200 0x00000200>;
> + reg-names = "sequencer_csr", "sample_store_csr";
> + interrupt-parent = <&cpu>;
> + interrupts = <8>;
> + altr,adc-mode = <1>;
> + altr,adc-slot-count = <2>;
> + altr,adc1-slot-sequence-1 = <1>;
> + altr,adc-number = <1>;
> +};
> +
> +Example: dual ADC
> +modular_adc_1: adc@0x18002200 {
> + compatible = "altr,modular-dual-adc";
> + reg = <0x18002000 0x00000008>,
> + <0x18002200 0x00000200>;
> + reg-names = "sequencer_csr", "sample_store_csr";
> + interrupt-parent = <&cpu>;
> + interrupts = <8>;
> + altr,adc-mode = <2>;
> + altr,adc-slot-count = <1>;
> + altr,adc1-slot-sequence-1 = <6>;
> + altr,adc2-slot-sequence-1 = <6>;
> +};
> \ No newline at end of file
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
