On 28/08/15 15:28, Vladimir Barinov wrote:
> These bindings can be used to register Holt HI-8435 threshold detector
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
This is now trivial so I'm taking it.
Applied to the togreg branch of iio.git
Thanks,
Jonathan
> ---
> Changes in version 2:
> - renamed file name hi-843x.txt to hi8435.txt
> - removed hi-8436,hi-8436,hi-8437
> - removed holt,debounce-soft field
> - renamed holt,debounc-soft-delay to holt,debounce-interval
> - renamed mr-gpio to reset-gpios
> Changes in version 3:
> - none
> Changes in version 4:
> - removed debounce_interval property
> - removed reset-gpios to use GPIO descriptor API
> Changes in version 5:
> - none
>
> .../devicetree/bindings/iio/adc/hi8435.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/hi8435.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt
> new file mode 100644
> index 0000000..3b0348c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/hi8435.txt
> @@ -0,0 +1,21 @@
> +Holt Integrated Circuits HI-8435 threshold detector bindings
> +
> +Required properties:
> + - compatible: should be "holt,hi8435"
> + - reg: spi chip select number for the device
> +
> +Recommended properties:
> + - spi-max-frequency: definition as per
> + Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional properties:
> + - gpios: GPIO used for controlling the reset pin
> +
> +Example:
> +sensor@0 {
> + compatible = "holt,hi8435";
> + reg = <0>;
> + gpios = <&gpio6 1 0>;
> +
> + spi-max-frequency = <1000000>;
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
