These bindings can be used to register Holt HI-8435 threshold detector
Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
---
Changes in version 2:
- renamed file name hi-843x.txt to hi8435.txt
- removed hi-8436,hi-8436,hi-8437
- removed holt,debounce-soft field
- renamed holt,debounc-soft-delay to holt,debounce-interval
- renamed mr-gpio to reset-gpios
Changes in version 3:
- none
Changes in version 4:
- removed debounce_interval property
- removed reset-gpios to use GPIO descriptor API
Changes in version 5:
- none
.../devicetree/bindings/iio/adc/hi8435.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/hi8435.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt
new file mode 100644
index 0000000..3b0348c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/hi8435.txt
@@ -0,0 +1,21 @@
+Holt Integrated Circuits HI-8435 threshold detector bindings
+
+Required properties:
+ - compatible: should be "holt,hi8435"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - gpios: GPIO used for controlling the reset pin
+
+Example:
+sensor@0 {
+ compatible = "holt,hi8435";
+ reg = <0>;
+ gpios = <&gpio6 1 0>;
+
+ spi-max-frequency = <1000000>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
