On Mon, Mar 10, 2025 at 05:47:03PM +0100, Jesper Nilsson wrote:
> Hi again Frank!
>
> I've now tested this patch-set together with your v9 on-top of the
> next-branch of the pci tree, and seems to be working good on my
> ARTPEC-6 set as RC:
>
> # lspci
> 00:00.0 PCI bridge: Renesas Technology Corp. Device 0024
> 01:00.0 PCI bridge: Pericom Semiconductor PI7C9X2G304 EL/SL PCIe2 3-Port/4-Lane Packet Switch (rev 05)
> 02:01.0 PCI bridge: Pericom Semiconductor PI7C9X2G304 EL/SL PCIe2 3-Port/4-Lane Packet Switch (rev 05)
> 02:02.0 PCI bridge: Pericom Semiconductor PI7C9X2G304 EL/SL PCIe2 3-Port/4-Lane Packet Switch (rev 05)
> 03:00.0 Non-Volatile memory controller: Phison Electronics Corporation E18 PCIe4 NVMe Controller (rev 01)
>
Thank you very much!
Frank
> However, when running as EP, I found that the DT setup for pcie_ep
> wasn't correct:
>
> diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
> index 399e87f72865..6d52f60d402d 100644
> --- a/arch/arm/boot/dts/axis/artpec6.dtsi
> +++ b/arch/arm/boot/dts/axis/artpec6.dtsi
> @@ -195,8 +195,8 @@ pcie: pcie@f8050000 {
>
> pcie_ep: pcie_ep@f8050000 {
> compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
> - reg = <0xf8050000 0x2000
> - 0xf8051000 0x2000
> + reg = <0xf8050000 0x1000
> + 0xf8051000 0x1000
> 0xf8040000 0x1000
> 0x00000000 0x20000000>;
> reg-names = "dbi", "dbi2", "phy", "addr_space";
>
> Even with this fix, I get a panic in dw_pcie_read_dbi() in EP-setup,
> both with and without:
>
> "PCI: artpec6: Use use_parent_dt_ranges and clean up artpec6_pcie_cpu_addr_fixup()"
>
> so it looks like the ARTPEC-6 EP functionality wasn't completely tested
> with this config.
>
> The ARTPEC-7 variant does work as EP with our local config, I'll try
> to see what I can do to correct ARTPEC-6 using the setup for ARTPEC-7,
> and test your patchset on the ARTPEC-7.
>
> Best regards,
>
> /Jesper
>
>
> On Wed, Mar 05, 2025 at 04:33:18PM +0100, Jesper Nilsson wrote:
> > Hi Frank,
> >
> > I'm the current maintainer of this driver. As Niklas Cassel wrote in
> > another email, artpec-7 was supposed to be upstreamed, as it is in most
> > parts identical to the artpec-6, but reality got in the way. I don't
> > think there is very much left to support it at the same level as artpec-6,
> > but give me some time to see if the best thing is to drop the artpec-7
> > support as Niklas suggested.
> >
> > Unfortunately, I'm travelling right now and don't have access to any
> > of my boards. I'll perform some testing next week when I'm back and
> > help to clean this up.
> >
> > Best regards,
> >
> > /Jesper
> >
> >
> > On Tue, Mar 04, 2025 at 12:49:34PM -0500, Frank Li wrote:
> > > This patches basic on
> > > https://lore.kernel.org/imx/20250128-pci_fixup_addr-v9-0-3c4bb506f665@xxxxxxx/
> > >
> > > I have not hardware to test and there are not axis,artpec7-pcie in kernel
> > > tree.
> > >
> > > Look for driver owner, who help test this and start move forward to remove
> > > cpu_addr_fixup() work.
> > >
> > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > ---
> > > Frank Li (2):
> > > ARM: dts: artpec6: Move PCIe nodes under bus@c0000000
> > > PCI: artpec6: Use use_parent_dt_ranges and clean up artpec6_pcie_cpu_addr_fixup()
> > >
> > > arch/arm/boot/dts/axis/artpec6.dtsi | 92 +++++++++++++++++--------------
> > > drivers/pci/controller/dwc/pcie-artpec6.c | 20 +------
> > > 2 files changed, 52 insertions(+), 60 deletions(-)
> > > ---
> > > base-commit: 1552be4855dacca5ea39b15b1ef0b96c91dbea0d
> > > change-id: 20250304-axis-6d12970976b4
> > >
> > > Best regards,
> > > ---
> > > Frank Li <Frank.Li@xxxxxxx>
> >
> > /^JN - Jesper Nilsson
> > --
> > Jesper Nilsson -- jesper.nilsson@xxxxxxxx
>
> /^JN - Jesper Nilsson
> --
> Jesper Nilsson -- jesper.nilsson@xxxxxxxx
