Quoting Xukai Wang (2025-02-17 06:45:17)
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 299bc678ed1b9fcd9110bb8c5937a1bd1ea60e23..f63355ab8adeeee90d29d1a975607f5dc0a58bd6 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -464,6 +464,12 @@ config COMMON_CLK_K210
> help
> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>
> +config COMMON_CLK_K230
> + bool "Clock driver for the Canaan Kendryte K230 SoC"
> + depends on OF && (ARCH_CANAAN || COMPILE_TEST)
It doesn't depend on OF to build from what I can tell. This should
simply be
depends on ARCH_CANAAN || COMPILE_TEST
right?
> + help
> + Support for the Canaan Kendryte K230 RISC-V SoC clocks.
> +
> config COMMON_CLK_SP7021
> tristate "Clock driver for Sunplus SP7021 SoC"
> depends on SOC_SP7021 || COMPILE_TEST
> diff --git a/drivers/clk/clk-k230.c b/drivers/clk/clk-k230.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..017ecad9ec47ed751f75fe5197aa119ae35e05f9
> --- /dev/null
> +++ b/drivers/clk/clk-k230.c
> @@ -0,0 +1,1347 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Kendryte Canaan K230 Clock Drivers
> + *
> + * Author: Xukai Wang <kingxukai@xxxxxxxxxxxx>
> + * Author: Troy Mitchell <troymitchell988@xxxxxxxxx>
> + */
> +
> +#include <dt-bindings/clock/canaan,k230-clk.h>
Please put dt-bindigns at the end of the include list.
> +#include <linux/clk.h>
Is this include used? Ideally a clk provider (clk-provider.h) isn't also
a clk consumer (clk.h).
> +#include <linux/clkdev.h>
Hopefully clkdev isn't used.
> +#include <linux/clk-provider.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
Is this include used?
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
Need to include mod_devicetable.h
> +
> +/* PLL control register bits. */
> +#define K230_PLL_BYPASS_ENABLE BIT(19)
> +#define K230_PLL_GATE_ENABLE BIT(2)
> +#define K230_PLL_GATE_WRITE_ENABLE BIT(18)
> +#define K230_PLL_OD_SHIFT 24
> +#define K230_PLL_OD_MASK 0xF
> +#define K230_PLL_R_SHIFT 16
> +#define K230_PLL_R_MASK 0x3F
> +#define K230_PLL_F_SHIFT 0
> +#define K230_PLL_F_MASK 0x1FFFF
> +#define K230_PLL0_OFFSET_BASE 0x00
> +#define K230_PLL1_OFFSET_BASE 0x10
> +#define K230_PLL2_OFFSET_BASE 0x20
> +#define K230_PLL3_OFFSET_BASE 0x30
> +#define K230_PLL_DIV_REG_OFFSET 0x00
> +#define K230_PLL_BYPASS_REG_OFFSET 0x04
> +#define K230_PLL_GATE_REG_OFFSET 0x08
> +#define K230_PLL_LOCK_REG_OFFSET 0x0C
> +
> +/* PLL lock register bits. */
> +#define K230_PLL_STATUS_MASK BIT(0)
> +
> +/* K230 CLK registers offset */
> +#define K230_CLK_AUDIO_CLKDIV_OFFSET 0x34
> +#define K230_CLK_PDM_CLKDIV_OFFSET 0x40
> +#define K230_CLK_CODEC_ADC_MCLKDIV_OFFSET 0x38
> +#define K230_CLK_CODEC_DAC_MCLKDIV_OFFSET 0x3c
> +
> +/* K230 CLK OPS. */
> +#define K230_CLK_OPS_GATE \
> + .enable = k230_clk_enable, \
> + .disable = k230_clk_disable, \
> + .is_enabled = k230_clk_is_enabled
> +
> +#define K230_CLK_OPS_RATE \
> + .set_rate = k230_clk_set_rate, \
> + .round_rate = k230_clk_round_rate, \
> + .recalc_rate = k230_clk_get_rate
> +
> +#define K230_CLK_OPS_MUX \
> + .set_parent = k230_clk_set_parent, \
> + .get_parent = k230_clk_get_parent, \
> + .determine_rate = clk_hw_determine_rate_no_reparent
> +
> +#define K230_CLK_OPS_ID_NONE 0
> +#define K230_CLK_OPS_ID_GATE_ONLY 1
> +#define K230_CLK_OPS_ID_RATE_ONLY 2
> +#define K230_CLK_OPS_ID_RATE_GATE 3
> +#define K230_CLK_OPS_ID_MUX_ONLY 4
> +#define K230_CLK_OPS_ID_MUX_GATE 5
> +#define K230_CLK_OPS_ID_MUX_RATE 6
> +#define K230_CLK_OPS_ID_ALL 7
> +#define K230_CLK_OPS_ID_NUM 8
> +
> +/* K230 CLK MACROS */
> +#define K230_CLK_MAX_PARENT_NUM 6
> +
> +#define K230_GATE_FORMAT(_reg, _bit, _reverse, _have_gate) \
> + .gate_reg_off = (_reg), \
> + .gate_bit_enable = (_bit), \
> + .gate_bit_reverse = (_reverse), \
> + .have_gate = (_have_gate)
> +
> +#define K230_RATE_FORMAT(_mul_min, _mul_max, _mul_shift, _mul_mask, \
> + _div_min, _div_max, _div_shift, _div_mask, \
> + _reg, _bit, _method, _reg_c, _bit_c, \
> + _mul_min_c, _mul_max_c, _mul_shift_c, _mul_mask_c, \
> + _have_rate, _have_rate_c) \
> + .rate_mul_min = (_mul_min), \
> + .rate_mul_max = (_mul_max), \
> + .rate_mul_shift = (_mul_shift), \
> + .rate_mul_mask = (_mul_mask), \
> + .rate_mul_min_c = (_mul_min_c), \
> + .rate_mul_max_c = (_mul_max_c), \
> + .rate_mul_shift_c = (_mul_shift_c), \
> + .rate_mul_mask_c = (_mul_mask_c), \
> + .rate_div_min = (_div_min), \
> + .rate_div_max = (_div_max), \
> + .rate_div_shift = (_div_shift), \
> + .rate_div_mask = (_div_mask), \
> + .rate_reg_off = (_reg), \
> + .rate_reg_off_c = (_reg_c), \
> + .rate_write_enable_bit = (_bit), \
> + .rate_write_enable_bit_c = (_bit_c), \
> + .method = (_method), \
> + .have_rate = (_have_rate), \
> + .have_rate_c = (_have_rate_c)
> +
> +#define K230_MUX_FORMAT(_reg, _shift, _mask, _have_mux) \
> + .mux_reg_off = (_reg), \
> + .mux_reg_shift = (_shift), \
> + .mux_reg_mask = (_mask), \
> + .have_mux = (_have_mux)
> +
> +#define K230_GATE_FORMAT_ZERO K230_GATE_FORMAT(0, 0, 0, false)
> +#define K230_RATE_FORMAT_ZERO K230_RATE_FORMAT(0, 0, 0, 0, 0, 0, \
> + 0, 0, 0, 0, 0, 0, \
> + 0, 0, 0, 0, 0, false, false)
> +#define K230_MUX_FORMAT_ZERO K230_MUX_FORMAT(0, 0, 0, false)
> +
> +struct k230_sysclk;
> +
> +/* K230 PLLs. */
> +enum k230_pll_id {
> + K230_PLL0, K230_PLL1, K230_PLL2, K230_PLL3, K230_PLL_NUM
> +};
> +
> +struct k230_pll {
> + enum k230_pll_id id;
> + struct k230_sysclk *ksc;
> + void __iomem *div, *bypass, *gate, *lock;
> + struct clk_hw hw;
> +};
> +
> +#define to_k230_pll(_hw) container_of(_hw, struct k230_pll, hw)
> +
> +struct k230_pll_cfg {
> + u32 reg;
> + enum k230_pll_id pll_id;
> + const char *name;
> +};
> +
> +/* K230 PLL_DIVS. */
> +struct k230_pll_div {
> + struct k230_sysclk *ksc;
> + struct clk_hw *hw;
> +};
> +
> +struct k230_pll_div_cfg {
> + const char *parent_name, *name;
> + int div;
> +};
> +
> +enum k230_pll_div_id {
> + K230_PLL0_DIV2,
> + K230_PLL0_DIV3,
> + K230_PLL0_DIV4,
> + K230_PLL1_DIV2,
> + K230_PLL1_DIV3,
> + K230_PLL1_DIV4,
> + K230_PLL2_DIV2,
> + K230_PLL2_DIV3,
> + K230_PLL2_DIV4,
> + K230_PLL3_DIV2,
> + K230_PLL3_DIV3,
> + K230_PLL3_DIV4,
> + K230_PLL_DIV_NUM
> +};
> +
> +enum k230_clk_div_type {
> + K230_MUL,
> + K230_DIV,
> + K230_MUL_DIV,
> +};
> +
> +/* K230 CLKS. */
> +struct k230_clk {
> + int id;
> + struct k230_sysclk *ksc;
> + struct clk_hw hw;
> +};
> +
> +#define to_k230_clk(_hw) container_of(_hw, struct k230_clk, hw)
> +
> +enum k230_clk_parent_type {
> + K230_OSC24M,
> + K230_PLL,
> + K230_PLL_DIV,
> + K230_CLK_COMPOSITE,
> +};
> +
> +struct k230_clk_parent {
> + enum k230_clk_parent_type type;
> + union {
> + enum k230_pll_div_id pll_div_id;
> + enum k230_pll_id pll_id;
> + int clk_id;
> + };
> +};
> +
> +struct k230_clk_cfg {
> + /* attr */
> + const char *name;
> + /* 0-read & write; 1-read only */
> + bool read_only;
> + int num_parent;
> + struct k230_clk_parent parent[K230_CLK_MAX_PARENT_NUM];
> + bool status;
> + int flags;
> +
> + /* rate reg */
> + u32 rate_reg_off;
> + u32 rate_reg_off_c;
> + void __iomem *rate_reg;
> + void __iomem *rate_reg_c;
> + /* rate info*/
> + u32 rate_write_enable_bit;
> + u32 rate_write_enable_bit_c;
> + enum k230_clk_div_type method;
> + bool have_rate;
> + bool have_rate_c;
> + /* rate mul */
> + u32 rate_mul_min;
> + u32 rate_mul_max;
> + u32 rate_mul_shift;
> + u32 rate_mul_mask;
> + /* rate mul-changable */
> + u32 rate_mul_min_c;
> + u32 rate_mul_max_c;
> + u32 rate_mul_shift_c;
> + u32 rate_mul_mask_c;
> + /* rate div */
> + u32 rate_div_min;
> + u32 rate_div_max;
> + u32 rate_div_shift;
> + u32 rate_div_mask;
> +
> + /* gate reg */
> + u32 gate_reg_off;
> + void __iomem *gate_reg;
> + /* gate info*/
> + bool have_gate;
> + u32 gate_bit_enable;
> + u32 gate_bit_reverse;
> +
> + /* mux reg */
> + u32 mux_reg_off;
> + void __iomem *mux_reg;
> + /* mux info */
> + bool have_mux;
> + u32 mux_reg_shift;
> + u32 mux_reg_mask;
> +};
> +
> +/* K230 SYSCLK. */
> +struct k230_sysclk {
> + struct platform_device *pdev;
> + void __iomem *pll_regs, *regs;
> + spinlock_t pll_lock, clk_lock;
> + struct k230_pll *plls;
> + struct k230_clk *clks;
> + struct k230_pll_div *dclks;
> +};
> +
> +static const struct k230_pll_cfg k230_pll_cfgs[] = {
> + [K230_PLL0] = {
> + .reg = K230_PLL0_OFFSET_BASE,
> + .pll_id = K230_PLL0,
> + .name = "pll0",
> + },
> + [K230_PLL1] = {
> + .reg = K230_PLL1_OFFSET_BASE,
> + .pll_id = K230_PLL1,
> + .name = "pll1",
> + },
> + [K230_PLL2] = {
> + .reg = K230_PLL2_OFFSET_BASE,
> + .pll_id = K230_PLL2,
> + .name = "pll2",
> + },
> + [K230_PLL3] = {
> + .reg = K230_PLL3_OFFSET_BASE,
> + .pll_id = K230_PLL3,
> + .name = "pll3",
> + },
> +};
> +
> +static const struct k230_pll_div_cfg k230_pll_div_cfgs[] = {
> + [K230_PLL0_DIV2] = { "pll0", "pll0_div2", 2},
> + [K230_PLL0_DIV3] = { "pll0", "pll0_div3", 3},
> + [K230_PLL0_DIV4] = { "pll0", "pll0_div4", 4},
> + [K230_PLL1_DIV2] = { "pll1", "pll1_div2", 2},
> + [K230_PLL1_DIV3] = { "pll1", "pll1_div3", 3},
> + [K230_PLL1_DIV4] = { "pll1", "pll1_div4", 4},
> + [K230_PLL2_DIV2] = { "pll2", "pll2_div2", 2},
> + [K230_PLL2_DIV3] = { "pll2", "pll2_div3", 3},
> + [K230_PLL2_DIV4] = { "pll2", "pll2_div4", 4},
> + [K230_PLL3_DIV2] = { "pll3", "pll3_div2", 2},
> + [K230_PLL3_DIV3] = { "pll3", "pll3_div3", 3},
> + [K230_PLL3_DIV4] = { "pll3", "pll3_div4", 4},
> +};
> +
> +static struct k230_clk_cfg k230_clk_cfgs[] = {
> + [K230_CPU0_SRC] = {
Can these be named variables instead of array elements? Then we can map
quickly to parents instead of going through an intermediate enum.
> + .name = "cpu0_src",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_PLL_DIV,
> + .pll_div_id = K230_PLL0_DIV2,
> + },
> + K230_RATE_FORMAT(1, 16, 0, 0,
> + 16, 16, 1, 0xF,
> + 0x0, 31, K230_MUL, 0, 0,
> + 0, 0, 0, 0,
> + true, false),
> + K230_GATE_FORMAT(0, 0, 0, true),
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_CPU0_ACLK] = {
> + .name = "cpu0_aclk",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_CLK_COMPOSITE,
> + .clk_id = K230_CPU0_SRC,
> + },
> + K230_RATE_FORMAT(1, 1, 0, 0,
> + 1, 8, 7, 0x7,
> + 0x0, 31, K230_MUL, 0, 0,
> + 0, 0, 0, 0,
> + true, false),
> + K230_GATE_FORMAT_ZERO,
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_CPU0_PLIC] = {
> + .name = "cpu0_plic",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_CLK_COMPOSITE,
> + .clk_id = K230_CPU0_SRC,
> + },
> + K230_RATE_FORMAT(1, 1, 0, 0,
> + 1, 8, 10, 0x7,
> + 0x0, 31, K230_DIV, 0, 0,
> + 0, 0, 0, 0,
> + true, false),
> + K230_GATE_FORMAT(0, 9, 0, true),
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_CPU0_NOC_DDRCP4] = {
> + .name = "cpu0_noc_ddrcp4",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_CLK_COMPOSITE,
> + .clk_id = K230_CPU0_SRC,
> + },
> + K230_RATE_FORMAT_ZERO,
> + K230_GATE_FORMAT(0x60, 7, 0, true),
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_CPU0_PCLK] = {
> + .name = "cpu0_pclk",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_PLL_DIV,
> + .pll_div_id = K230_PLL0_DIV4,
> + },
> + K230_RATE_FORMAT(1, 1, 0, 0,
> + 1, 8, 15, 0x7,
> + 0x0, 31, K230_DIV, 0, 0,
> + 0, 0, 0, 0,
> + true, false),
> + K230_GATE_FORMAT(0, 13, 0, true),
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_PMU_PCLK] = {
> + .name = "pmu_pclk",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 1,
> + .parent[0] = {
> + .type = K230_OSC24M,
> + },
> + K230_RATE_FORMAT_ZERO,
> + K230_GATE_FORMAT(0x10, 0, 0, true),
> + K230_MUX_FORMAT_ZERO,
> + },
> + [K230_HS_OSPI_SRC] = {
> + .name = "hs_ospi_src",
> + .read_only = false,
> + .flags = 0,
> + .status = true,
> + .num_parent = 2,
> + .parent[0] = {
> + .type = K230_PLL_DIV,
> + .pll_div_id = K230_PLL0_DIV2,
> + },
> + .parent[1] = {
> + .type = K230_PLL_DIV,
> + .pll_div_id = K230_PLL2_DIV4,
> + },
> + K230_RATE_FORMAT_ZERO,
> + K230_GATE_FORMAT(0x18, 24, 0, true),
> + K230_MUX_FORMAT(0x20, 18, 0x1, true),
> + },
> +};
> +
> +#define K230_CLK_NUM ARRAY_SIZE(k230_clk_cfgs)
> +
> +static void k230_init_pll(void __iomem *regs, enum k230_pll_id pll_id,
> + struct k230_pll *pll)
> +{
> + void __iomem *base;
> +
> + pll->id = pll_id;
> + base = regs + k230_pll_cfgs[pll_id].reg;
> + pll->div = base + K230_PLL_DIV_REG_OFFSET;
> + pll->bypass = base + K230_PLL_BYPASS_REG_OFFSET;
> + pll->gate = base + K230_PLL_GATE_REG_OFFSET;
> + pll->lock = base + K230_PLL_LOCK_REG_OFFSET;
> +}
> +
> +static int k230_pll_prepare(struct clk_hw *hw)
> +{
> + struct k230_pll *pll = to_k230_pll(hw);
> + u32 reg;
> +
> + /* wait for PLL lock until it reachs lock status */
s/reachs/reaches/
> + return readl_poll_timeout(pll->lock, reg,
> + (reg & K230_PLL_STATUS_MASK) == K230_PLL_STATUS_MASK,
> + 400, 0);
> +}
> +
> +static bool k230_pll_hw_is_enabled(struct k230_pll *pll)
> +{
> + return (readl(pll->gate) & K230_PLL_GATE_ENABLE) == K230_PLL_GATE_ENABLE;
> +}
> +
> +static void k230_pll_enable_hw(void __iomem *regs, struct k230_pll *pll)
> +{
> + u32 reg;
> +
> + if (k230_pll_hw_is_enabled(pll))
> + return;
> +
> + /* Set PLL factors */
> + reg = readl(pll->gate);
> + reg |= (K230_PLL_GATE_ENABLE | K230_PLL_GATE_WRITE_ENABLE);
> + writel(reg, pll->gate);
> +}
> +
> +static int k230_pll_enable(struct clk_hw *hw)
> +{
> + struct k230_pll *pll = to_k230_pll(hw);
> + struct k230_sysclk *ksc = pll->ksc;
> +
> + guard(spinlock)(&ksc->pll_lock);
> + k230_pll_enable_hw(ksc->regs, pll);
> +
> + return 0;
> +}
> +
> +static void k230_pll_disable(struct clk_hw *hw)
> +{
> + struct k230_pll *pll = to_k230_pll(hw);
> + struct k230_sysclk *ksc = pll->ksc;
> + u32 reg;
> +
> + guard(spinlock)(&ksc->pll_lock);
> + reg = readl(pll->gate);
> +
> + reg &= ~(K230_PLL_GATE_ENABLE);
> + reg |= (K230_PLL_GATE_WRITE_ENABLE);
> +
> + writel(reg, pll->gate);
> +}
> +
> +static int k230_pll_is_enabled(struct clk_hw *hw)
> +{
> + return k230_pll_hw_is_enabled(to_k230_pll(hw));
> +}
> +
> +static int k230_pll_init(struct clk_hw *hw)
> +{
> + if (k230_pll_is_enabled(hw))
> + return clk_prepare_enable(hw->clk);
Is this CLK_IS_CRITICAL?
> +
> + return 0;
> +}
> +
> +static unsigned long k230_pll_get_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + struct k230_pll *pll = to_k230_pll(hw);
> + struct k230_sysclk *ksc = pll->ksc;
> + u32 reg;
> + u32 r, f, od;
> +
> + reg = readl(pll->bypass);
> + if (reg & K230_PLL_BYPASS_ENABLE)
> + return parent_rate;
> +
> + reg = readl(pll->lock);
> + if (!(reg & (K230_PLL_STATUS_MASK))) { /* unlocked */
> + dev_err(&ksc->pdev->dev, "%s is unlock.\n", clk_hw_get_name(hw));
> + return 0;
> + }
> +
> + reg = readl(pll->div);
> + r = ((reg >> K230_PLL_R_SHIFT) & K230_PLL_R_MASK) + 1;
> + f = ((reg >> K230_PLL_F_SHIFT) & K230_PLL_F_MASK) + 1;
> + od = ((reg >> K230_PLL_OD_SHIFT) & K230_PLL_OD_MASK) + 1;
> +
> + return div_u64((u64)parent_rate * f, r * od);
Is this mul_u64_u32_div()?
> +}
> +
> +static const struct clk_ops k230_pll_ops = {
> + .init = k230_pll_init,
> + .prepare = k230_pll_prepare,
> + .enable = k230_pll_enable,
> + .disable = k230_pll_disable,
> + .is_enabled = k230_pll_is_enabled,
> + .recalc_rate = k230_pll_get_rate,
> +};
> +
> +static int k230_register_pll(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + enum k230_pll_id pll_id,
> + const char *name,
> + int num_parents,
> + const struct clk_ops *ops)
> +{
> + struct k230_pll *pll = &ksc->plls[pll_id];
> + struct clk_init_data init = {};
> + struct device *dev = &pdev->dev;
> + int ret;
> + const struct clk_parent_data parent_data[] = {
> + { .index = 0, },
> + };
> +
> + init.name = name;
> + init.parent_data = parent_data;
> + init.num_parents = num_parents;
> + init.ops = ops;
> +
> + pll->hw.init = &init;
> + pll->ksc = ksc;
> +
> + ret = devm_clk_hw_register(dev, &pll->hw);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to register pll");
Missing newline on printk.
> +
> + return 0;
> +}
> +
> +static int k230_register_plls(struct platform_device *pdev, struct k230_sysclk *ksc)
> +{
> + int i, ret;
> + const struct k230_pll_cfg *cfg;
> +
> + for (i = 0; i < K230_PLL_NUM; i++) {
> + cfg = &k230_pll_cfgs[i];
> +
> + k230_init_pll(ksc->pll_regs, i, &ksc->plls[i]);
> +
> + ret = k230_register_pll(pdev, ksc, cfg->pll_id, cfg->name, 1,
> + &k230_pll_ops);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "register %s failed\n", cfg->name);
> + }
> +
> + return 0;
> +}
> +
> +static int k230_register_pll_divs(struct platform_device *pdev, struct k230_sysclk *ksc)
> +{
> + struct device *dev = &pdev->dev;
> + struct clk_hw *hw;
> +
> + for (int i = 0; i < K230_PLL_DIV_NUM; i++) {
> + hw = devm_clk_hw_register_fixed_factor(dev, k230_pll_div_cfgs[i].name,
> + k230_pll_div_cfgs[i].parent_name,
> + 0, 1, k230_pll_div_cfgs[i].div);
> + if (IS_ERR(hw))
> + return PTR_ERR(hw);
> + ksc->dclks[i].hw = hw;
> + ksc->dclks[i].ksc = ksc;
> + }
> +
> + return 0;
> +}
> +
> +static int k230_clk_enable(struct clk_hw *hw)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 reg;
> +
> + if (!cfg->have_gate)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have gate\n");
> +
> + guard(spinlock)(&ksc->clk_lock);
> + reg = readl(cfg->gate_reg);
> + if (cfg->gate_bit_reverse)
> + reg &= ~BIT(cfg->gate_bit_enable);
> + else
> + reg |= BIT(cfg->gate_bit_enable);
> + writel(reg, cfg->gate_reg);
> +
> + return 0;
> +}
> +
> +static void k230_clk_disable(struct clk_hw *hw)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 reg;
> +
> + if (!cfg->have_gate) {
> + dev_err(&ksc->pdev->dev, "This clock doesn't have gate\n");
Why are the clk_ops assigned to this clk then?
> + return;
> + }
> +
> + guard(spinlock)(&ksc->clk_lock);
> + reg = readl(cfg->gate_reg);
> +
> + if (cfg->gate_bit_reverse)
> + reg |= BIT(cfg->gate_bit_enable);
> + else
> + reg &= ~BIT(cfg->gate_bit_enable);
> +
> + writel(reg, cfg->gate_reg);
> +}
> +
> +static int k230_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 reg;
> +
> + if (!cfg->have_gate)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have gate\n");
Why are the clk_ops assigned to this clk then? Don't use
dev_err_probe() here.
> +
> + guard(spinlock)(&ksc->clk_lock);
> + reg = readl(cfg->gate_reg);
> +
> + /* Check gate bit condition based on configuration and then set ret */
> + if (cfg->gate_bit_reverse)
> + return (BIT(cfg->gate_bit_enable) & reg) ? 1 : 0;
> + else
> + return (BIT(cfg->gate_bit_enable) & ~reg) ? 1 : 0;
> +}
> +
> +static int k230_clk_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u8 reg;
> +
> + if (!cfg->have_mux)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have mux\n");
Why are the clk_ops assigned to this clk then? Don't use
dev_err_probe() here.
> +
> + guard(spinlock)(&ksc->clk_lock);
> + reg = (cfg->mux_reg_mask & index) << cfg->mux_reg_shift;
> + writeb(reg, cfg->mux_reg);
> +
> + return 0;
> +}
> +
> +static u8 k230_clk_get_parent(struct clk_hw *hw)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u8 reg;
> +
> + if (!cfg->have_mux)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock doesn't have mux\n");
All these checks should go away and we should have different clk_ops for
different clk types.
> +
> + guard(spinlock)(&ksc->clk_lock);
> + reg = readb(cfg->mux_reg);
> +
> + return reg;
> +}
> +
> +static unsigned long k230_clk_get_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 mul, div;
> +
> + if (!cfg->have_rate) /* no divider, return parents' clk */
> + return parent_rate;
> +
> + guard(spinlock)(&ksc->clk_lock);
> + switch (cfg->method) {
> + /*
> + * K230_MUL: div_mask+1/div_max...
> + * K230_DIV: mul_max/div_mask+1
> + * K230_MUL_DIV: mul_mask/div_mask...
> + */
> + case K230_MUL:
> + div = cfg->rate_div_max;
> + mul = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
> + & cfg->rate_div_mask;
> + mul++;
> + break;
> + case K230_DIV:
> + mul = cfg->rate_mul_max;
> + div = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
> + & cfg->rate_div_mask;
> + div++;
> + break;
> + case K230_MUL_DIV:
> + if (!cfg->have_rate_c) {
> + mul = (readl(cfg->rate_reg) >> cfg->rate_mul_shift)
> + & cfg->rate_mul_mask;
> + div = (readl(cfg->rate_reg) >> cfg->rate_div_shift)
> + & cfg->rate_div_mask;
> + } else {
> + mul = (readl(cfg->rate_reg_c) >> cfg->rate_mul_shift_c)
> + & cfg->rate_mul_mask_c;
> + div = (readl(cfg->rate_reg_c) >> cfg->rate_div_shift)
> + & cfg->rate_div_mask;
> + }
> + break;
> + default:
> + return 0;
> + }
> +
> + return div_u64((u64)parent_rate * mul, div);
> +}
> +
> +static int k230_clk_find_approximate(struct k230_clk *clk,
> + u32 mul_min,
> + u32 mul_max,
> + u32 div_min,
> + u32 div_max,
> + enum k230_clk_div_type method,
> + unsigned long rate,
> + unsigned long parent_rate,
> + u32 *div,
> + u32 *mul)
> +{
> + long abs_min;
> + long abs_current;
> + long perfect_divide;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> +
> + const u32 codec_clk[9] = {
> + 2048000,
> + 3072000,
> + 4096000,
> + 6144000,
> + 8192000,
> + 11289600,
> + 12288000,
> + 24576000,
> + 49152000
> + };
> +
> + const u32 codec_div[9][2] = {
> + {3125, 16},
> + {3125, 24},
> + {3125, 32},
> + {3125, 48},
> + {3125, 64},
> + {15625, 441},
> + {3125, 96},
> + {3125, 192},
> + {3125, 384}
> + };
> +
> + const u32 pdm_clk[20] = {
> + 128000,
> + 192000,
> + 256000,
> + 384000,
> + 512000,
> + 768000,
> + 1024000,
> + 1411200,
> + 1536000,
> + 2048000,
> + 2822400,
> + 3072000,
> + 4096000,
> + 5644800,
> + 6144000,
> + 8192000,
> + 11289600,
> + 12288000,
> + 24576000,
> + 49152000
> + };
> +
> + const u32 pdm_div[20][2] = {
> + {3125, 1},
> + {6250, 3},
> + {3125, 2},
> + {3125, 3},
> + {3125, 4},
> + {3125, 6},
> + {3125, 8},
> + {125000, 441},
> + {3125, 12},
> + {3125, 16},
> + {62500, 441},
> + {3125, 24},
> + {3125, 32},
> + {31250, 441},
> + {3125, 48},
> + {3125, 64},
> + {15625, 441},
> + {3125, 96},
> + {3125, 192},
> + {3125, 384}
> + };
> +
> + switch (method) {
> + /* only mul can be changeable 1/12,2/12,3/12...*/
> + case K230_MUL:
> + perfect_divide = (long)((parent_rate * 1000) / rate);
> + abs_min = abs(perfect_divide -
> + (long)(((long)div_max * 1000) / (long)mul_min));
> + *mul = mul_min;
> +
> + for (u32 i = mul_min + 1; i <= mul_max; i++) {
> + abs_current = abs(perfect_divide -
> + (long)((long)((long)div_max * 1000) / (long)i));
> + if (abs_min > abs_current) {
> + abs_min = abs_current;
> + *mul = i;
> + }
> + }
> +
> + *div = div_max;
> + break;
> + /* only div can be changeable, 1/1,1/2,1/3...*/
> + case K230_DIV:
> + perfect_divide = (long)((parent_rate * 1000) / rate);
> + abs_min = abs(perfect_divide -
> + (long)(((long)div_min * 1000) / (long)mul_max));
> + *div = div_min;
> +
> + for (u32 i = div_min + 1; i <= div_max; i++) {
> + abs_current = abs(perfect_divide -
> + (long)((long)((long)i * 1000) / (long)mul_max));
> + if (abs_min > abs_current) {
> + abs_min = abs_current;
> + *div = i;
> + }
> + }
> +
> + *mul = mul_max;
> + break;
> + /* mul and div can be changeable. */
> + case K230_MUL_DIV:
> + if (cfg->rate_reg_off == K230_CLK_CODEC_ADC_MCLKDIV_OFFSET ||
> + cfg->rate_reg_off == K230_CLK_CODEC_DAC_MCLKDIV_OFFSET) {
> + for (u32 j = 0; j < 9; j++) {
> + if (0 == (rate - codec_clk[j])) {
> + *div = codec_div[j][0];
> + *mul = codec_div[j][1];
> + }
> + }
> + } else if (cfg->rate_reg_off == K230_CLK_AUDIO_CLKDIV_OFFSET ||
> + cfg->rate_reg_off == K230_CLK_PDM_CLKDIV_OFFSET) {
> + for (u32 j = 0; j < 20; j++) {
> + if (0 == (rate - pdm_clk[j])) {
> + *div = pdm_div[j][0];
> + *mul = pdm_div[j][1];
> + }
> + }
> + } else {
> + return -EINVAL;
> + }
> + break;
> + default:
> + WARN_ON_ONCE(true);
> + return -EPERM;
This is impossible? Remove the default case and the compiler will warn
if an enum case is missing.
> + }
> + return 0;
> +}
> +
> +static long k230_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 div = 0, mul = 0;
> +
> + if (k230_clk_find_approximate(clk,
> + cfg->rate_mul_min, cfg->rate_mul_max,
> + cfg->rate_div_min, cfg->rate_div_max,
> + cfg->method, rate, *parent_rate, &div, &mul)) {
> + dev_err(&ksc->pdev->dev,
> + "[%s]: clk %s round rate error!\n",
> + __func__,
> + clk_hw_get_name(hw));
> + return 0;
Why isn't an error returned?
> + }
> +
> + return div_u64((u64)(*parent_rate) * mul, div);
> +}
> +
> +static int k230_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct k230_clk *clk = to_k230_clk(hw);
> + struct k230_sysclk *ksc = clk->ksc;
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[clk->id];
> + u32 div = 0, mul = 0, reg = 0, reg_c;
> +
> + if (!cfg->have_rate || !cfg->rate_reg)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "This clock may have no rate\n");
> +
> + if (rate > parent_rate || rate == 0 || parent_rate == 0)
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "rate or parent_rate error\n");
> +
> + if (cfg->read_only)
> + return dev_err_probe(&ksc->pdev->dev, -EPERM, "This clk rate is read only\n");
> +
> + if (k230_clk_find_approximate(clk,
> + cfg->rate_mul_min, cfg->rate_mul_max,
> + cfg->rate_div_min, cfg->rate_div_max,
> + cfg->method, rate, parent_rate, &div, &mul))
> + return dev_err_probe(&ksc->pdev->dev, -EINVAL, "[%s]: clk %s set rate error!\n",
> + __func__, clk_hw_get_name(hw));
> +
> + guard(spinlock)(&ksc->clk_lock);
> + if (!cfg->have_rate_c) {
> + reg = readl(cfg->rate_reg);
> + reg &= ~((cfg->rate_div_mask) << (cfg->rate_div_shift));
> +
> + if (cfg->method == K230_DIV) {
> + reg &= ~((cfg->rate_mul_mask) << (cfg->rate_mul_shift));
> + reg |= ((div - 1) & cfg->rate_div_mask) << (cfg->rate_div_shift);
> + } else if (cfg->method == K230_MUL) {
> + reg |= ((mul - 1) & cfg->rate_div_mask) << (cfg->rate_div_shift);
> + } else {
> + reg |= (mul & cfg->rate_mul_mask) << (cfg->rate_mul_shift);
> + reg |= (div & cfg->rate_div_mask) << (cfg->rate_div_shift);
> + }
> + reg |= BIT(cfg->rate_write_enable_bit);
> + } else {
> + reg = readl(cfg->rate_reg);
> + reg_c = readl(cfg->rate_reg_c);
> + reg &= ~((cfg->rate_div_mask) << (cfg->rate_div_shift));
> + reg_c &= ~((cfg->rate_mul_mask_c) << (cfg->rate_mul_shift_c));
> + reg_c |= BIT(cfg->rate_write_enable_bit_c);
> +
> + reg_c |= (mul & cfg->rate_mul_mask_c) << (cfg->rate_mul_shift_c);
> + reg |= (div & cfg->rate_div_mask) << (cfg->rate_div_shift);
> +
> + writel(reg_c, cfg->rate_reg_c);
> + }
> + writel(reg, cfg->rate_reg);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops k230_clk_ops_arr[K230_CLK_OPS_ID_NUM] = {
> + [K230_CLK_OPS_ID_NONE] = {
> + /* Sentinel */
> + },
> + [K230_CLK_OPS_ID_GATE_ONLY] = {
> + K230_CLK_OPS_GATE,
> + },
> + [K230_CLK_OPS_ID_RATE_ONLY] = {
> + K230_CLK_OPS_RATE,
> + },
> + [K230_CLK_OPS_ID_RATE_GATE] = {
> + K230_CLK_OPS_RATE,
> + K230_CLK_OPS_GATE,
> + },
> + [K230_CLK_OPS_ID_MUX_ONLY] = {
> + K230_CLK_OPS_MUX,
> + },
> + [K230_CLK_OPS_ID_MUX_GATE] = {
> + K230_CLK_OPS_MUX,
> + K230_CLK_OPS_GATE,
> + },
> + [K230_CLK_OPS_ID_MUX_RATE] = {
> + K230_CLK_OPS_MUX,
> + K230_CLK_OPS_RATE,
> + },
> + [K230_CLK_OPS_ID_ALL] = {
> + K230_CLK_OPS_MUX,
> + K230_CLK_OPS_RATE,
> + K230_CLK_OPS_GATE,
> + },
> +};
> +
> +static int k230_register_clk(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + int id,
> + const struct clk_parent_data *parent_data,
> + u8 num_parents,
> + unsigned long flags)
> +{
> + struct k230_clk *clk = &ksc->clks[id];
> + struct k230_clk_cfg *cfg = &k230_clk_cfgs[id];
> + struct clk_init_data init = {};
> + int clk_id = 0;
> + int ret;
> +
> + if (cfg->have_rate) {
> + cfg->rate_reg = (ksc->regs + cfg->rate_reg_off);
Drop useless parenthesis please.
> + clk_id += K230_CLK_OPS_ID_RATE_ONLY;
> + }
> +
> + if (cfg->have_mux) {
> + cfg->mux_reg = (ksc->regs + cfg->mux_reg_off);
> + clk_id += K230_CLK_OPS_ID_MUX_ONLY;
> +
> + /* mux clock doesn't match the case that num_parents less than 2 */
> + if (num_parents < 2)
> + return -EINVAL;
> + }
> +
> + if (cfg->have_gate) {
> + cfg->gate_reg = (ksc->regs + cfg->gate_reg_off);
Drop useless parenthesis please.
> + clk_id += K230_CLK_OPS_ID_GATE_ONLY;
> + }
> +
> + if (cfg->have_rate_c)
> + cfg->rate_reg_c = (ksc->regs + cfg->rate_reg_off_c);
Drop useless parenthesis please.
> +
> + init.name = k230_clk_cfgs[id].name;
> + init.flags = flags;
> + init.parent_data = parent_data;
> + init.num_parents = num_parents;
> + init.ops = &k230_clk_ops_arr[clk_id];
> +
> + clk->id = id;
> + clk->ksc = ksc;
> + clk->hw.init = &init;
> +
> + ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
> + if (ret)
> + return dev_err_probe(&pdev->dev,
> + ret,
> + "register clock %s failed\n",
> + k230_clk_cfgs[id].name);
> +
> + return 0;
> +}
> +
> +static int k230_register_mux_clk(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + struct clk_parent_data *parent_data,
> + int num_parent,
> + int id)
> +{
> + return k230_register_clk(pdev, ksc, id,
> + (const struct clk_parent_data *)parent_data,
Please remove useless cast.
> + num_parent, 0);
> +}
> +
> +static int k230_register_osc24m_child(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + int id)
> +{
> + const struct clk_parent_data parent_data = {
> + .index = 0,
> + };
> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, 0);
> +}
> +
> +static int k230_register_pll_child(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + int id,
> + enum k230_pll_id pll_id,
> + unsigned long flags)
> +{
> + const struct clk_parent_data parent_data = {
> + .hw = &ksc->plls[pll_id].hw,
> + };
> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, flags);
> +}
> +
> +static int k230_register_pll_div_child(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + int id,
> + enum k230_pll_div_id pll_div_id,
> + unsigned long flags)
> +{
> + const struct clk_parent_data parent_data = {
> + .hw = ksc->dclks[pll_div_id].hw,
> + };
> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, flags);
> +}
> +
> +static int k230_register_clk_child(struct platform_device *pdev,
> + struct k230_sysclk *ksc,
> + int id,
> + int parent_id)
> +{
> + const struct clk_parent_data parent_data = {
> + .hw = &ksc->clks[parent_id].hw,
> + };
> + return k230_register_clk(pdev, ksc, id, &parent_data, 1, 0);
> +}
> +
> +static int _k230_clk_mux_get_parent_data(struct k230_sysclk *ksc,
> + struct k230_clk_parent *pclk,
> + struct clk_parent_data *parent_data)
> +{
> + switch (pclk->type) {
> + case K230_OSC24M:
> + parent_data->index = 0;
> + break;
> + case K230_PLL:
> + parent_data->hw = &ksc->plls[pclk->pll_id].hw;
> + break;
> + case K230_PLL_DIV:
> + parent_data->hw = ksc->dclks[pclk->pll_div_id].hw;
> + break;
> + case K230_CLK_COMPOSITE:
> + parent_data->hw = &ksc->clks[pclk->clk_id].hw;
> + break;
> + default:
> + WARN_ON_ONCE(true);
> + return -EPERM;
> + }
> +
> + return 0;
> +}
> +
> +static int k230_clk_mux_get_parent_data(struct k230_sysclk *ksc,
> + struct k230_clk_cfg *cfg,
> + struct clk_parent_data *parent_data,
> + int num_parent)
> +{
> + int ret;
> + struct k230_clk_parent *pclk = cfg->parent;
> +
> + for (int i = 0; i < num_parent; i++) {
> + ret = _k230_clk_mux_get_parent_data(ksc, &pclk[i], &parent_data[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int k230_register_clks(struct platform_device *pdev, struct k230_sysclk *ksc)
> +{
> + struct k230_clk_cfg *cfg;
> + struct k230_clk_parent *pclk;
> + struct clk_parent_data parent_data[K230_CLK_MAX_PARENT_NUM];
> + int ret, i;
> +
> + /*
> + * Single parent clock:
> + * pll0_div2 sons: cpu0_src
> + * pll0_div4 sons: cpu0_pclk
> + * cpu0_src sons: cpu0_aclk, cpu0_plic, cpu0_noc_ddrcp4, pmu_pclk
> + *
> + * Mux clock:
> + * hs_ospi_src parents: pll0_div2, pll2_div4
> + */
> + for (i = 0; i < K230_CLK_NUM; i++) {
> + cfg = &k230_clk_cfgs[i];
> + if (!cfg->status)
> + continue;
> +
> + if (cfg->have_mux) {
> + ret = k230_clk_mux_get_parent_data(ksc, cfg, parent_data,
> + cfg->num_parent);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "Failed to get parent data\n");
> +
> + ret = k230_register_mux_clk(pdev, ksc, parent_data,
> + cfg->num_parent, i);
> + } else {
> + pclk = cfg->parent;
> + switch (pclk->type) {
> + case K230_OSC24M:
> + ret = k230_register_osc24m_child(pdev, ksc, i);
> + break;
> + case K230_PLL:
> + ret = k230_register_pll_child(pdev, ksc, i,
> + pclk->pll_id, cfg->flags);
> + break;
> + case K230_PLL_DIV:
> + ret = k230_register_pll_div_child(pdev, ksc, i,
> + pclk->pll_div_id, cfg->flags);
> + break;
> + case K230_CLK_COMPOSITE:
> + ret = k230_register_clk_child(pdev, ksc, i,
> + pclk->clk_id);
> + break;
> + default:
> + return dev_err_probe(&pdev->dev, -EINVAL, "Invalid type\n");
> + }
> + }
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "register child id %d failed\n", i);
> + }
> +
> + return 0;
> +}
> +
> +static struct clk_hw *k230_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct k230_sysclk *ksc;
> + unsigned int idx;
> +
> + if (clkspec->args_count != 1)
> + return ERR_PTR(-EINVAL);
> +
> + idx = clkspec->args[0];
> + if (idx >= K230_CLK_NUM)
> + return ERR_PTR(-EINVAL);
> +
> + if (!data)
> + return ERR_PTR(-EINVAL);
> +
> + ksc = (struct k230_sysclk *)data;
Drop useless cast please.
> +
> + return &ksc->clks[idx].hw;
> +}
> +
> +static int k230_clk_init_plls(struct platform_device *pdev)
> +{
> + int ret;
> + struct k230_sysclk *ksc = platform_get_drvdata(pdev);
> +
> + spin_lock_init(&ksc->pll_lock);
> +
> + ksc->pll_regs = devm_platform_ioremap_resource(pdev, 0);
> + if (!ksc->pll_regs)
Does it return an error pointer or NULL on failure? The dev_err_probe()
below is incorrect or the if condition above is.
> + return dev_err_probe(&pdev->dev, PTR_ERR(ksc->pll_regs), "map registers failed\n");
Doesn't this already print an error?
> +
> + ret = k230_register_plls(pdev, ksc);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "register plls failed\n");
> +
> + ret = k230_register_pll_divs(pdev, ksc);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "register pll_divs failed\n");
> +
> + for (int i = 0; i < K230_PLL_DIV_NUM; i++) {
> + ret = devm_clk_hw_register_clkdev(&pdev->dev, ksc->dclks[i].hw,
> + k230_pll_div_cfgs[i].name, NULL);
Why is clkdev being used?
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "clock_lookup create failed\n");
> + }
> +
> + return 0;
> +}
> +
> +static int k230_clk_init_clks(struct platform_device *pdev)
> +{
> + int ret;
> + struct k230_sysclk *ksc = platform_get_drvdata(pdev);
> +
> + spin_lock_init(&ksc->clk_lock);
> +
> + ksc->regs = devm_platform_ioremap_resource(pdev, 1);
> + if (!ksc->regs)
> + return dev_err_probe(&pdev->dev, PTR_ERR(ksc->regs), "failed to map registers\n");
> +
> + ret = k230_register_clks(pdev, ksc);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "register clock provider failed\n");
> +
> + ret = devm_of_clk_add_hw_provider(&pdev->dev, k230_clk_hw_onecell_get, ksc);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "add clock provider failed\n");
> +
> + return 0;
> +}
> +
> +static int k230_clk_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct k230_sysclk *ksc;
> +
> + ksc = devm_kzalloc(&pdev->dev, sizeof(struct k230_sysclk), GFP_KERNEL);
> + if (!ksc)
> + return -ENOMEM;
> +
> + ksc->plls = devm_kmalloc_array(&pdev->dev, K230_PLL_NUM,
Any reason devm_kcalloc() isn't used?
> + sizeof(struct k230_pll), GFP_KERNEL);
> + if (!ksc->plls)
> + return -ENOMEM;
> +
> + ksc->dclks = devm_kmalloc_array(&pdev->dev, K230_PLL_DIV_NUM,
> + sizeof(struct k230_pll_div), GFP_KERNEL);
> + if (!ksc->dclks)
> + return -ENOMEM;
> +
> + ksc->clks = devm_kmalloc_array(&pdev->dev, K230_CLK_NUM,
> + sizeof(struct k230_clk), GFP_KERNEL);
> + if (!ksc->clks)
> + return -ENOMEM;
> +
> + ksc->pdev = pdev;
> + platform_set_drvdata(pdev, ksc);
> +
> + ret = k230_clk_init_plls(pdev);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "init plls failed\n");
> +
> + ret = k230_clk_init_clks(pdev);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret, "init clks failed\n");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id k230_clk_ids[] = {
> + { .compatible = "canaan,k230-clk" },
> + { /* Sentinel */ },
Nitpick: Please drop last comma so that nothing can come after without
causing a compilation error.
> +};
> +MODULE_DEVICE_TABLE(of, k230_clk_ids);
