On 7.02.2025 8:39 AM, Manikanta Mylavarapu wrote:
> From: Devi Priya <quic_devipriy@xxxxxxxxxxx>
>
> Add a node for the nss clock controller found on ipq9574 based devices.
>
> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> ---
> Changes in V9:
> - Rebased on linux-next tip.
>
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 942290028972..29008b156a7e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -1193,6 +1193,25 @@ pcie0: pci@28000000 {
> status = "disabled";
> };
>
> + nsscc: clock-controller@39b00000 {
> + compatible = "qcom,ipq9574-nsscc";
> + reg = <0x39b00000 0x80000>;
> + clocks = <&xo_board_clk>,
> + <&cmn_pll NSS_1200MHZ_CLK>,
> + <&cmn_pll PPE_353MHZ_CLK>,
> + <&gcc GPLL0_OUT_AUX>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <&gcc GCC_NSSCC_CLK>;
This last clock doesn't seem to be used in the driver - is that by design?
Konrad
