RE: [PATCH 1/7] dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thanks for the feedback.

> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: 28 January 2025 11:16
> Subject: Re: [PATCH 1/7] dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
> 
> Hi Biju,
> 
> On Sun, 26 Jan 2025 at 14:46, Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that of
> > the RZ/V2H, but the SD0 channel has only dedicated pins, so we must
> > use SD_STATUS register to control voltage and power enable (internal
> > regulator).
> >
> > For SD1 and SD2 channel we can either use gpio regulator or internal
> > regulator (using SD_STATUS register) for voltage switching.
> > Document RZ/G3E SDHI IP support.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
> > --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> > @@ -68,6 +68,9 @@ properties:
> >                - renesas,sdhi-r9a08g045 # RZ/G3S
> >                - renesas,sdhi-r9a09g011 # RZ/V2M
> >            - const: renesas,rzg2l-sdhi
> > +      - items:
> > +          - const: renesas,sdhi-r9a09g047 # RZ/G3E
> > +          - const: renesas,sdhi-r9a09g057 # RZ/V2H(P)
> 
> OK... but...
> 
> >
> >    reg:
> >      maxItems: 1
> > @@ -124,6 +127,7 @@ allOf:
> >          compatible:
> >            contains:
> >              enum:
> > +              - renesas,sdhi-r9a09g047
> >                - renesas,sdhi-r9a09g057
> >                - renesas,rzg2l-sdhi
> >      then:
> > @@ -211,6 +215,22 @@ allOf:
> >          sectioned off to be run by a separate second clock source to allow
> >          the main core clock to be turned off to save power.
> >
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,sdhi-r9a09g047
> > +    then:
> > +      properties:
> > +        vqmmc-regulator:
> > +          type: object
> > +          description: VQMMC SD regulator
> > +          $ref: /schemas/regulator/regulator.yaml#
> > +          unevaluatedProperties: false
> > +
> > +      required:
> > +        - vqmmc-regulator
> > +
> >  required:
> >    - compatible
> >    - reg
> 
> Given RZ/V2H can use the internal regulator control, too, I think it can be optional on both.  Then
> renesas,sdhi-r9a09g047 can just use
> renesas,sdhi-r9a09g057 as a fallback compatible.

Agreed, will make internal regulator control. optional for both RZ/G2H and RZ/G3E
and just use renesas,sdhi-r9a09g057 as a fallback compatible for renesas,sdhi-r9a09g047.

Cheers,
Biju




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux