Re: [PATCH 8/8] ARM: dts: msm: Use Operation Points V2 for UFS on SM8650

[neil.armstrong@xxxxxxxxxx]

Hi,

On 16/01/2025 10:11, Ziqi Chen wrote:
> Use Operation Points V2 for UFS on SM8650 so that multi-level
> clock/gear scaling can be possible.


I've already sent a similar one at https://lore.kernel.org/all/20250115-topic-sm8x50-upstream-dt-icc-update-v1-10-eaa8b10e2af7@xxxxxxxxxx/

Neil

> Co-developed-by: Can Guo <quic_cang@xxxxxxxxxxx>
> Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
> Signed-off-by: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8650.dtsi | 51 +++++++++++++++++++++++-----
>   1 file changed, 43 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index 01ac3769ffa6..5466f1217f64 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -2557,18 +2557,11 @@ ufs_mem_hc: ufs@1d84000 {
>   				      "tx_lane0_sync_clk",
>   				      "rx_lane0_sync_clk",
>   				      "rx_lane1_sync_clk";
> -			freq-table-hz = <100000000 403000000>,
> -					<0 0>,
> -					<0 0>,
> -					<100000000 403000000>,
> -					<100000000 403000000>,
> -					<0 0>,
> -					<0 0>,
> -					<0 0>;
>   
>   			resets = <&gcc GCC_UFS_PHY_BCR>;
>   			reset-names = "rst";
>   
> +			operating-points-v2 = <&ufs_opp_table>;
>   			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
>   					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>   					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> @@ -2590,6 +2583,48 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>   			#reset-cells = <1>;
>   
>   			status = "disabled";
> +
> +			ufs_opp_table: opp-table {
> +					   compatible = "operating-points-v2";
> +					   // LOW_SVS
> +					   opp-100000000 {
> +							   opp-hz = /bits/ 64 <100000000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <100000000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>;
> +							   required-opps = <&rpmhpd_opp_low_svs>;
> +					   };
> +
> +					   // SVS
> +					   opp-201500000 {
> +							   opp-hz = /bits/ 64 <201500000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <201500000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>;
> +							   required-opps = <&rpmhpd_opp_svs>;
> +					   };
> +
> +					   // NOM/TURBO
> +					   opp-403000000 {
> +							   opp-hz = /bits/ 64 <403000000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <403000000>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>,
> +									   /bits/ 64 <0>;
> +							   required-opps = <&rpmhpd_opp_nom>;
> +					   };
> +			   };
>   		};
>   
>   		ice: crypto@1d88000 {