On 17/04/15 11:50, Irina Tirdea wrote: > Add binding documentation for Bosch BMC150 magnetometer. > > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> > --- > .../bindings/iio/magnetometer/bmc150_magn.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > new file mode 100644 > index 0000000..4ed035c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt > @@ -0,0 +1,20 @@ > +* Bosch BMC150 magnetometer sensor > + > +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf > + > +Required properties: > + > + - compatible : should be "bosch,bmc150_magn" > + - reg : the I2C address of the magnetometer > + > +Optional properties: > + > + - gpios : should be device tree identifier of the magnetometer DRDY pin Hmm. Under device tree this should be done as an interrupt. You only (currently) need the dubious frig with gpios for ACPI I think. > + > +Example: > + > +bmc150_magn@12 { > + compatible = "bosch,bmc150_magn"; > + reg = <0x12>; > + interrupt-gpio = <&gpio1 0 1>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
