This patch adds the device tree support for the XiangShan platform's nanhu soc
Signed-off-by: qinshaoqing <qinshaoqing@xxxxxxxxxx>
---
arch/riscv/Kconfig.socs | 5 +
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/xiangshan/Makefile | 2 +
arch/riscv/boot/dts/xiangshan/nanhu-v3a.dts | 226 ++++++++++++++++++++
4 files changed, 234 insertions(+)
create mode 100644 arch/riscv/boot/dts/xiangshan/Makefile
create mode 100644 arch/riscv/boot/dts/xiangshan/nanhu-v3a.dts
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index f51bb24bc84c..89c80fd493fb 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -80,4 +80,9 @@ config SOC_CANAAN_K210
help
This enables support for Canaan Kendryte K210 SoC platform hardware.
+config SOC_XIANGSHAN
+ bool "XiangShan SoCs"
+ help
+ This enables support for XiangShan SoC platform hardware
+
endmenu # "SoC selection"
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index fdae05bbf556..43a79cc9dd7c 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -7,5 +7,6 @@ subdir-y += sifive
subdir-y += sophgo
subdir-y += starfive
subdir-y += thead
+subdir-y += xiangshan
obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE))
diff --git a/arch/riscv/boot/dts/xiangshan/Makefile
b/arch/riscv/boot/dts/xiangshan/Makefile
new file mode 100644
index 000000000000..41e585490a97
--- /dev/null
+++ b/arch/riscv/boot/dts/xiangshan/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_XIANGSHAN) += nanhu-v3a.dtb
diff --git a/arch/riscv/boot/dts/xiangshan/nanhu-v3a.dts
b/arch/riscv/boot/dts/xiangshan/nanhu-v3a.dts
new file mode 100644
index 000000000000..560de7c7f22e
--- /dev/null
+++ b/arch/riscv/boot/dts/xiangshan/nanhu-v3a.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2023-2024 BOSC */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "bosc,nanhu-v3a";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <24000000>;
+
+ cpu0: cpu@0 {
+ compatible = "bosc,nanhu-v3a", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdcv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <16384>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <0x0>;
+
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "bosc,nanhu-v3a", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdcv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <16384>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <16384>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <0x1>;
+
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+
+ clkc: misc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "clkc";
+ clock-frequency = <100000000>;
+ };
+
+ sdhci_clock: sdhci_clck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sdhci_clock";
+ clock-frequency = <25000000>;
+ };
+
+ i2c0_clock: i2c0_clck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "i2c0_clock";
+ clock-frequency = <100000000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "bosc,nanhu-v3a-soc", "simple-bus";
+ ranges;
+
+ clint0: clint@38000000 {
+ compatible = "riscv,clint0";
+ interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 &cpu1_intc 3 &cpu1_intc 7>;
+ reg = <0x0 0x38000000 0x0 0x10000>;
+ reg-names = "control";
+ clock-frequency-mhz = <10>;
+ };
+
+ plic: interrupt-controller@3c000000 {
+ #interrupt-cells = <1>;
+ compatible = "riscv,plic0";
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 0xb &cpu0_intc 0x9 &cpu1_intc
0xb &cpu1_intc 0x9>;
+ reg = <0 0x3c000000 0 0x4000000>;
+ reg-names = "control";
+ riscv,max-priority = <7>;
+ riscv,ndev = <128>;
+ };
+
+ ethernet0: ethernet@190000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ reg = <0 0x190000 0 0x10000>;
+ reg-names = "stmmaceth";
+ interrupt-parent = <&plic>;
+ interrupts = <76 75 74>;
+ interrupt-names = "eth_lpi", "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth";
+ clocks = <&clkc>;
+ snps,pbl = <2>;
+ snps,mixed-burst;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ mdio0: mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: phy@0 {
+ phyaddr = <0x0>;
+ compatible = "marvell,88E1510";
+ device_type = "ethernet-phy";
+ reg = <0x0>;
+ };
+ phy1: phy@1 {
+ phyaddr = <0x1>;
+ compatible = "marvell,88E1510";
+ device_type = "ethernet-phy";
+ reg = <0x1>;
+ };
+ };
+ };
+
+ ethernet1: ethernet@1a0000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ reg = <0 0x1a0000 0 0x10000>;
+ reg-names = "stmmaceth1";
+ interrupt-parent = <&plic>;
+ interrupts = <73 72 71>;
+ interrupt-names = "eth_lpi", "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth";
+ clocks = <&clkc>;
+ snps,pbl = <2>;
+ snps,mixed-burst;
+ phy-mode = "rgmii";
+ fixed-link{
+ speed = <1000>;
+ full-duplex;
+ pause;
+ asym-pause;
+ };
+ };
+
+ sdhci2: sdhci@1200000 {
+ compatible = "snps,dwcmshc-sdhci";
+ reg = <0 0x1200000 0 0x20000>;
+ interrupt-parent = <&plic>;
+ interrupts = <77 78>;
+ clocks = <&sdhci_clock>;
+ clock-names = "core";
+ no-1-8-v;
+ disable-wp;
+ bus-width = <4>;
+ max_req_size = <4096>;
+ status = "okay";
+ };
+
+ i2c@70000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x70000 0x0 0x10000>;
+ interrupts = <66>;
+ interrupt-parent = <&plic>;
+ clock-frequency = <100000>;
+ clocks = <&i2c0_clock>;
+ status = "okay";
+ };
+
+ i2c@80000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x80000 0x0 0x10000>;
+ interrupts = <65>;
+ interrupt-parent = <&plic>;
+ clock-frequency = <100000>;
+ clocks = <&i2c0_clock>;
+ status = "okay";
+ };
+
+ uart0: serial@50000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x50000 0x0 0x10000>;
+ reg-shift = <0x02>;
+ reg-io-width = <0x04>;
+ interrupt-parent = <&plic>;
+ interrupts = <68>;
+ clock-frequency = <100000000>;
+ status = "okay";
+ };
+ };
+
+ memory: memory@100000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+};
--
2.43.0
