On Tue, Dec 10, 2024 at 05:11:06PM +0800, Xiangxu Yin wrote:
> Enable the DisplayPort node, config related regulator, lane mapping,
> hpd-gpios on the Qualcomm QCS615 RIDE platform.
>
> Signed-off-by: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qcs615-ride.dts | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> index 694719a09ac46bfa2fe34f1883c0970b9d0902be..0ac543577ec1850d6e4f19ff1d64252b00fffae3 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> @@ -44,6 +44,20 @@ dp_connector_out: endpoint {
> };
> };
> };
You mentioned v3 of the display support series. However v3 doesn't
contain dp_connector_out label.
> +
> + dp2-connector {
> + compatible = "dp-connector";
> + label = "DP2";
> + type = "mini";
> +
> + hpd-gpios = <&ioexp 8 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + dp2_connector_in: endpoint {
> + remote-endpoint = <&mdss_dp0_out>;
> + };
> + };
> + };
> };
>
> &apps_rsc {
> @@ -291,6 +305,22 @@ &mdss_dsi0_phy {
> status = "okay";
> };
>
> +&mdss_dp0 {
> + status = "okay";
> +};
> +
> +&mdss_dp0_out {
> + data-lanes = <3 2 0 1>;
This hasn't been agreed upon yet. Please abstain from using the
configuration bits that are still in discussion.
> + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
> + remote-endpoint = <&dp2_connector_in>;
> +};
> +
> +&mdss_dp_phy {
> + vdda-phy-supply = <&vreg_l11a>;
> + vdda-pll-supply = <&vreg_l5a>;
> + status = "okay";
> +};
> +
> &qupv3_id_0 {
> status = "okay";
> };
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
