The patches include: 1.ADD DisplayPort controller and phy nodes to Qualcomm QCS615 dtsi file. 2.Add dp-connector, config hpd-gpios which used for Displayport hotplug detect. 3.Config lane mapping through data-lanes prop. This patch series depends on below patch series: - dispcc https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@xxxxxxxxxxx/ - dispcc dts https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@xxxxxxxxxxx/ - display https://lore.kernel.org/all/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@xxxxxxxxxxx/ - displayport driver https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d93ef@xxxxxxxxxxx/ Signed-off-by: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx> --- Xiangxu Yin (2): arm64: dts: qcom: Add DisplayPort support for QCS615 arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform arch/arm64/boot/dts/qcom/qcs615-ride.dts | 30 +++++++++ arch/arm64/boot/dts/qcom/qcs615.dtsi | 107 ++++++++++++++++++++++++++++++- 2 files changed, 135 insertions(+), 2 deletions(-) --- base-commit: 68586ffc0ad47448d0c00a72ba61db66b127c23a change-id: 20241210-add-displayport-support-to-qcs615-devicetree-1575aa4e299d Best regards, -- xiangxuy <quic_xiangxuy@xxxxxxxxxxx>