On Tue, Dec 10, 2024 at 05:11:04PM +0800, Xiangxu Yin wrote: > The patches include: > 1.ADD DisplayPort controller and phy nodes to Qualcomm QCS615 dtsi file. > 2.Add dp-connector, config hpd-gpios which used for Displayport hotplug detect. > 3.Config lane mapping through data-lanes prop. > > This patch series depends on below patch series: > - dispcc > https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@xxxxxxxxxxx/ > - dispcc dts > https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@xxxxxxxxxxx/ > - display > https://lore.kernel.org/all/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@xxxxxxxxxxx/ > - displayport driver > https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d93ef@xxxxxxxxxxx/ No, it doesn't. The DT and the driver can come up separately. > > Signed-off-by: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx> > > --- > Xiangxu Yin (2): > arm64: dts: qcom: Add DisplayPort support for QCS615 > arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform > > arch/arm64/boot/dts/qcom/qcs615-ride.dts | 30 +++++++++ > arch/arm64/boot/dts/qcom/qcs615.dtsi | 107 ++++++++++++++++++++++++++++++- > 2 files changed, 135 insertions(+), 2 deletions(-) > --- > base-commit: 68586ffc0ad47448d0c00a72ba61db66b127c23a > change-id: 20241210-add-displayport-support-to-qcs615-devicetree-1575aa4e299d > > Best regards, > -- > xiangxuy <quic_xiangxuy@xxxxxxxxxxx> > -- With best wishes Dmitry
