Re: [PATCH v4 3/3] can: flexcan: add NXP S32G2/S32G3 SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/4/2024 10:05 AM, Marc Kleine-Budde wrote:
On 04.12.2024 09:49:15, Ciprian Costea wrote:
From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>

Add device type data for S32G2/S32G3 SoC.

FlexCAN module from S32G2/S32G3 is similar with i.MX SoCs, but interrupt
management is different.

On S32G2/S32G3 SoC, there are separate interrupts for state change, bus
errors, Mailboxes 0-7 and Mailboxes 8-127 respectively.
In order to handle this FlexCAN hardware particularity, first reuse the
'FLEXCAN_QUIRK_NR_IRQ_3' quirk provided by mcf5441x's irq handling
support. Secondly, use the newly introduced
'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk which handles the case where two
separate mailbox ranges are controlled by independent hardware interrupt
lines.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
---

Looks good to me!

Unrelated to this patch, but I want to extend the "FLEXCAN hardware
feature flags" table in "flexcan.h". Can you provide the needed
information?


Hello Marc,

I would say the following S32G related information could be added:

/* FLEXCAN hardware feature flags
  *
  * Below is some version info we got:
  *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece-   FD Mode     MB
  *                                Filter? connected?  Passive detection  ption in MB Supported?
  * MCF5441X FlexCAN2  ?               no       yes        no       no        no           no     16
  *    MX25  FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
  *    MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no           no     64
  *    MX35  FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
  *    MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no           no     64
  *    MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes           no     64
  *    MX8QM FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes     64
  *    MX8MP FlexCAN3  03.00.17.01    yes       yes        no      yes       yes          yes     64
  *    VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no     64
  *  LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no     64
  *  LX2160A FlexCAN3  03.00.23.00     no       yes        no      yes       yes          yes     64
* S32G2/S32G3 FlexCAN3 03.00.39.00 no yes no yes yes yes 128
  *
  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
  */

regards,
Marc


Would you like me to send another version of this patchset with above information included ?

Best Regards,
Ciprian





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux