Re: [PATCH v4 3/3] can: flexcan: add NXP S32G2/S32G3 SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04.12.2024 09:49:15, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> 
> Add device type data for S32G2/S32G3 SoC.
> 
> FlexCAN module from S32G2/S32G3 is similar with i.MX SoCs, but interrupt
> management is different.
> 
> On S32G2/S32G3 SoC, there are separate interrupts for state change, bus
> errors, Mailboxes 0-7 and Mailboxes 8-127 respectively.
> In order to handle this FlexCAN hardware particularity, first reuse the
> 'FLEXCAN_QUIRK_NR_IRQ_3' quirk provided by mcf5441x's irq handling
> support. Secondly, use the newly introduced
> 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk which handles the case where two
> separate mailbox ranges are controlled by independent hardware interrupt
> lines.
> 
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---

Looks good to me!

Unrelated to this patch, but I want to extend the "FLEXCAN hardware
feature flags" table in "flexcan.h". Can you provide the needed
information?

> /* FLEXCAN hardware feature flags
>  *
>  * Below is some version info we got:
>  *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece-   FD Mode     MB
>  *                                Filter? connected?  Passive detection  ption in MB Supported?
>  * MCF5441X FlexCAN2  ?               no       yes        no       no        no           no     16
>  *    MX25  FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
>  *    MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no           no     64
>  *    MX35  FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
>  *    MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no           no     64
>  *    MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes           no     64
>  *    MX8QM FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes     64
>  *    MX8MP FlexCAN3  03.00.17.01    yes       yes        no      yes       yes          yes     64
>  *    VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no     64
>  *  LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no     64
>  *  LX2160A FlexCAN3  03.00.23.00     no       yes        no      yes       yes          yes     64
>  *
>  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
>  */

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux