From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> Enable the PCIe controller and PHY nodes for RDP 441. Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts | 74 +++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index 846413817e9a..83eca8435cff 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts @@ -62,4 +62,78 @@ data-pins { bias-pull-up; }; }; + + pcie0_default: pcie0-default-state { + clkreq-n-pins { + pins = "gpio37"; + function = "pcie0_clk"; + drive-strength = <8>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-low; + }; + + wake-n-pins { + pins = "gpio39"; + function = "pcie0_wake"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + pcie1_default: pcie1-default-state { + clkreq-n-pins { + pins = "gpio46"; + function = "pcie1_clk"; + drive-strength = <8>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio47"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-low; + }; + + wake-n-pins { + pins = "gpio48"; + function = "pcie1_wake"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default>; + + perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default>; + + perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + status = "okay"; }; -- 2.34.1