Mailbox nodes defined in the top-level J722s/AM62p SoC dtsi files are
incomplete and may not be functional unless they are extended with a
chosen interrupt and connection to a remote processor.
Disable the Mailbox nodes in the dtsi files and only enable the ones
that are actually used on a given board.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 4 ++++
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 41e1c24b11441..39f5c2d12fadb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -768,6 +768,7 @@ mailbox0_cluster0: mailbox@29000000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster1: mailbox@29010000 {
@@ -777,6 +778,7 @@ mailbox0_cluster1: mailbox@29010000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster2: mailbox@29020000 {
@@ -786,6 +788,7 @@ mailbox0_cluster2: mailbox@29020000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster3: mailbox@29030000 {
@@ -795,6 +798,7 @@ mailbox0_cluster3: mailbox@29030000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
ecap0: pwm@23100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 7f3dc39e12bc9..ad71d2f27f538 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -621,6 +621,8 @@ partition@3fc0000 {
};
&mailbox0_cluster0 {
+ status = "okay";
+
mbox_r5_0: mbox-r5-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
@@ -628,6 +630,8 @@ mbox_r5_0: mbox-r5-0 {
};
&mailbox0_cluster1 {
+ status = "okay";
+
mbox_mcu_r5_0: mbox-mcu-r5-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
--
2.39.2
