[PATCH 2/2] arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add nodes for the R5F and C7x cores on the SoC. This includes the mailbox
and memory carveouts used by these remote cores.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 .../arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 158 ++++++++++++++++++
 1 file changed, 158 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 44dfbdf892775..9be6bba28c26f 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -50,11 +50,71 @@ secure_ddr: optee@9e800000 {
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
 		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
+
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_1_memory_region: c7x-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x1c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
 	};
 
 	vsys_5v0: regulator-1 {
@@ -391,3 +451,101 @@ &sdhci1 {
 	ti,fails-without-test-cd;
 	status = "okay";
 };
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_wkup_r5_0: mbox-wkup-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+
+	mbox_main_r5_0: mbox-main-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c7x_1: mbox-c7x-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+&c7x_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+	memory-region = <&c7x_1_dma_memory_region>,
+			<&c7x_1_memory_region>;
+	status = "okay";
+};
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux