Hi Neil,
Thanks for your reply.
On 2024/11/10 20:24, Neil Armstrong wrote:
[ EXTERNAL EMAIL ]
Hi,
Le 01/11/2024 à 09:27, Xianwei Zhao via B4 Relay a écrit :
Add pinctrl driver support for Amloigc A4 SoC
I want to find out what kind of solution is feasible to
meet the needs of all parties. This RFC verion is one of them.
All of Amogic SoCs GPIO device requirement is met here by
adding GPIO bank definition instead of the pin definition.
Binding header files will no longer be added to future
SoCs's pin devices.
The pinctrl software only adds insterface of of_xlate to support
for transformation without affecting the overall framework and
is compatible with previous drivers.
The code in DTS file is also readable when using GPIO, as below:
reset-gpios = <&gpio AMLOGIC_GPIO(AMLOGIC_GPIO_X, 6) GPIO_ACTIVE_LOW>;
Fine, but why not use 3 cells instead of this macro ? Since you
introduced the
custom xlate, parsing the 3 cells would be easier that using a macro:
reset-gpios = <&gpio AMLOGIC_GPIO_X 6 GPIO_ACTIVE_LOW>;
Neil
I was prepared to do this before, mainly later considering incompatible
binding, using the original two parameter passing
If use three parameters, I need to modify the corresponding binding
property. in file:
Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
"#gpio-cells":
const: 2
It must be compatible with the current number of parameters(3)
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
Changes in v4:
- Add interface of of_xlate support.
- Add const for some variable.
- Link to v3:
https://lore.kernel.org/r/20241018-a4_pinctrl-v3-0-e76fd1cf01d7@xxxxxxxxxxx
Changes in v3:
- Remove head file from binding.
- Move GPIO define to file *.c.
- Link to v2:
https://lore.kernel.org/r/20241014-a4_pinctrl-v2-0-3e74a65c285e@xxxxxxxxxxx
Changes in v2:
- Use one marco instead of all pin define.
- Add unit name for dts node.
- Link to v1:
https://lore.kernel.org/all/20240611-a4_pinctrl-v1-0-dc487b1977b3@xxxxxxxxxxx/
---
Xianwei Zhao (4):
dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
pinctrl: meson: add interface of of_xlate
pinctrl: meson: Add driver support for Amlogic A4 SoCs
arm64: dts: amlogic: a4: add pinctrl node
.../bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml | 2 +
arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 36 +
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-amlogic-a4.c | 1321
++++++++++++++++++++
drivers/pinctrl/meson/pinctrl-meson.c | 4 +
drivers/pinctrl/meson/pinctrl-meson.h | 4 +
include/dt-bindings/gpio/amlogic-gpio.h | 50 +
8 files changed, 1424 insertions(+)
---
base-commit: 58e2d28ed28e5bc8836f8c14df1f94c27c1f9e2f
change-id: 20241012-a4_pinctrl-09d1b2a17e47
Best regards,
