Add pinctrl driver support for Amloigc A4 SoC I want to find out what kind of solution is feasible to meet the needs of all parties. This RFC verion is one of them. All of Amogic SoCs GPIO device requirement is met here by adding GPIO bank definition instead of the pin definition. Binding header files will no longer be added to future SoCs's pin devices. The pinctrl software only adds insterface of of_xlate to support for transformation without affecting the overall framework and is compatible with previous drivers. The code in DTS file is also readable when using GPIO, as below: reset-gpios = <&gpio AMLOGIC_GPIO(AMLOGIC_GPIO_X, 6) GPIO_ACTIVE_LOW>; Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx> --- Changes in v4: - Add interface of of_xlate support. - Add const for some variable. - Link to v3: https://lore.kernel.org/r/20241018-a4_pinctrl-v3-0-e76fd1cf01d7@xxxxxxxxxxx Changes in v3: - Remove head file from binding. - Move GPIO define to file *.c. - Link to v2: https://lore.kernel.org/r/20241014-a4_pinctrl-v2-0-3e74a65c285e@xxxxxxxxxxx Changes in v2: - Use one marco instead of all pin define. - Add unit name for dts node. - Link to v1: https://lore.kernel.org/all/20240611-a4_pinctrl-v1-0-dc487b1977b3@xxxxxxxxxxx/ --- Xianwei Zhao (4): dt-bindings: pinctrl: Add support for Amlogic A4 SoCs pinctrl: meson: add interface of of_xlate pinctrl: meson: Add driver support for Amlogic A4 SoCs arm64: dts: amlogic: a4: add pinctrl node .../bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml | 2 + arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 36 + drivers/pinctrl/meson/Kconfig | 6 + drivers/pinctrl/meson/Makefile | 1 + drivers/pinctrl/meson/pinctrl-amlogic-a4.c | 1321 ++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson.c | 4 + drivers/pinctrl/meson/pinctrl-meson.h | 4 + include/dt-bindings/gpio/amlogic-gpio.h | 50 + 8 files changed, 1424 insertions(+) --- base-commit: 58e2d28ed28e5bc8836f8c14df1f94c27c1f9e2f change-id: 20241012-a4_pinctrl-09d1b2a17e47 Best regards, -- Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
