From: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>
This adds support for the video-demo-adapter for the Haikou devkit with
Tiger RK3588 SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
It's main feature is a Leadtek DSI-display with touchscreen. To drive these
components a number of additional regulators are grouped on the adapter as
well as a PCA9670 gpio-expander to provide the needed additional gpio-lines.
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../rk3588-tiger-haikou-video-demo.dtso | 153 ++++++++++++++++++
2 files changed, 154 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 09423070c992..0c4ee6a767b8 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
new file mode 100644
index 000000000000..c7416349e7d5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Tiger system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+&{/} {
+ video-adapter-leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ video-adapter-led {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+ label = "video-adapter-led";
+ linux,default-trigger = "none";
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&dc_12v>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
+ vcc1v8_video: regulator-vcc1v8-video {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8-video";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_baseboard>;
+ };
+
+ vcc2v8_video: regulator-vcc2v8-video {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc2v8-video";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&vcc3v3_baseboard>;
+ };
+};
+
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "leadtek,ltk050h3148w";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc1v8_video>;
+ reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+ vci-supply = <&vcc2v8_video>;
+
+ port {
+ mipi_panel_in: endpoint {
+ remote-endpoint = <&dsi0_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi0_in {
+ dsi0_in_vp3: endpoint {
+ remote-endpoint = <&vp3_out_dsi0>;
+ };
+};
+
+&dsi0_out {
+ dsi0_out_panel: endpoint {
+ remote-endpoint = <&mipi_panel_in>;
+ };
+};
+
+&i2c6 {
+ /* OV5675, GT911, DW9714 are limited to 400KHz */
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+ irq-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&touch_int>;
+ pinctrl-names = "default";
+ reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+ AVDD28-supply = <&vcc2v8_video>;
+ VDDIO-supply = <&vcc3v3_baseboard>;
+ };
+
+ pca9670: gpio@27 {
+ compatible = "nxp,pca9670";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&mipidcphy0 {
+ status = "okay";
+};
+
+&pinctrl {
+ touch {
+ touch_int: touch-int {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&vp3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp3>;
+ };
+};
--
2.45.2
