[RFC v1 10/14] arm64: dts: mediatek: mt7988: add lvts node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

Add Low Voltage Thermal Sensor (LVTS) node for mt7988 SoC.

Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index ed8ce1e6f68b..de9a9ff2edd8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt65xx.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
 
 / {
 	compatible = "mediatek,mt7988a";
@@ -103,6 +104,7 @@ infracfg: clock-controller@10001000 {
 			compatible = "mediatek,mt7988-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		topckgen: clock-controller@1001b000 {
@@ -268,6 +270,17 @@ i2c2: i2c@11005000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100a000 {
+			compatible = "mediatek,mt7988-lvts-ap";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100a000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_calibration>;
+			nvmem-cell-names = "lvts-calib-data-1";
+		};
+
 		ssusb0: usb@11190000 {
 			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
 			reg = <0 0x11190000 0 0x2e00>,
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux