Il 29/10/24 11:39, Frank Wunderlich ha scritto:
From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Add Low Voltage Thermal Sensor (LVTS) node for mt7988 SoC.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Please add the lvts_calibration nvmem entry in this commit instead.
Cheers,
Angelo
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index ed8ce1e6f68b..de9a9ff2edd8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt65xx.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
/ {
compatible = "mediatek,mt7988a";
@@ -103,6 +104,7 @@ infracfg: clock-controller@10001000 {
compatible = "mediatek,mt7988-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
topckgen: clock-controller@1001b000 {
@@ -268,6 +270,17 @@ i2c2: i2c@11005000 {
status = "disabled";
};
+ lvts: lvts@1100a000 {
+ compatible = "mediatek,mt7988-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100a000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_calibration>;
+ nvmem-cell-names = "lvts-calib-data-1";
+ };
+
ssusb0: usb@11190000 {
compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
reg = <0 0x11190000 0 0x2e00>,
