> -----Original Message-----
> From: Frank Li <frank.li@xxxxxxx>
> Sent: 2024年10月10日 23:22
> To: Wei Fang <wei.fang@xxxxxxx>
> Cc: davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; Vladimir Oltean <vladimir.oltean@xxxxxxx>; Claudiu
> Manoil <claudiu.manoil@xxxxxxx>; Clark Wang <xiaoning.wang@xxxxxxx>;
> christophe.leroy@xxxxxxxxxx; linux@xxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> imx@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH net-next 10/11] net: enetc: add preliminary support for
> i.MX95 ENETC PF
>
> On Thu, Oct 10, 2024 at 04:59:45AM +0000, Wei Fang wrote:
> > > On Wed, Oct 09, 2024 at 05:51:15PM +0800, Wei Fang wrote:
> > > > The i.MX95 ENETC has been upgraded to revision 4.1, which is very
> > > > different from the LS1028A ENETC (revision 1.0) except for the SI
> > > > part. Therefore, the fsl-enetc driver is incompatible with i.MX95
> > > > ENETC PF. So we developed the nxp-enetc4 driver for i.MX95 ENETC
> > > So add new nxp-enetc4 driver for i.MX95 ENETC PF with
> > > major revision 4.
> > >
> > > > PF, and this driver will be used to support the ENETC PF with
> > > > major revision 4 in the future.
> > > >
> > > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h
> > > b/drivers/net/ethernet/freescale/enetc/enetc.h
> > > > index 97524dfa234c..7f1ea11c33a0 100644
> > > > --- a/drivers/net/ethernet/freescale/enetc/enetc.h
> > > > +++ b/drivers/net/ethernet/freescale/enetc/enetc.h
> > > > @@ -14,6 +14,7 @@
> > > > #include <net/xdp.h>
> > > >
> > > > #include "enetc_hw.h"
> > > > +#include "enetc4_hw.h"
> > > >
> > > > #define ENETC_SI_ALIGN 32
> > > >
> > > > +static inline bool is_enetc_rev1(struct enetc_si *si) {
> > > > + return si->pdev->revision == ENETC_REV1; }
> > > > +
> > > > +static inline bool is_enetc_rev4(struct enetc_si *si) {
> > > > + return si->pdev->revision == ENETC_REV4; }
> > > > +
> > >
> > > Actually, I suggest you check features, instead of check version number.
> > >
> > This is mainly used to distinguish between ENETC v1 and ENETC v4 in
> > the general interfaces. See enetc_ethtool.c.
>
> Suggest use flags, such as, IS_SUPPORT_ETHTOOL.
>
> otherwise, your check may become complex in future.
>
> If use flags, you just change id table in future.
enetc_ethtool just is an example, I meant that the ENETCv4 and ENETCv1
use some common drivers, like enect_pf_common, enetc-core, so different
hardware versions have different logic, that's all.
>
> { PCI_DEVICE(PCI_VENDOR_ID_NXP2, PCI_DEVICE_ID_NXP2_ENETC_PF),
> .driver_data = IS_SUPPORT_ETHTOOL | .... },
>
> Frank
> >
> > > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
> > > b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
> > > > new file mode 100644
> > > > index 000000000000..e38ade76260b
> > > > --- /dev/null
> > > > +++ b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
> > > > @@ -0,0 +1,761 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > > > +/* Copyright 2024 NXP */
> > > > +#include <linux/unaligned.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of_net.h>
> > > > +#include <linux/of_platform.h>
> > > > +#include <linux/clk.h>
> > > > +#include <linux/pinctrl/consumer.h> #include
> > > > +<linux/fsl/netc_global.h>
> > >
> > > sort headers.
> > >
> >
> > Sure
> >
> > > > +static int enetc4_pf_probe(struct pci_dev *pdev,
> > > > + const struct pci_device_id *ent) {
> > > > + struct device *dev = &pdev->dev;
> > > > + struct enetc_si *si;
> > > > + struct enetc_pf *pf;
> > > > + int err;
> > > > +
> > > > + err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf));
> > > > + if (err) {
> > > > + dev_err(dev, "PCIe probing failed\n");
> > > > + return err;
> > >
> > > use dev_err_probe()
> > >
> >
> > Okay
> >
> > > > + }
> > > > +
> > > > + /* si is the private data. */
> > > > + si = pci_get_drvdata(pdev);
> > > > + if (!si->hw.port || !si->hw.global) {
> > > > + err = -ENODEV;
> > > > + dev_err(dev, "Couldn't map PF only space!\n");
> > > > + goto err_enetc_pci_probe;
> > > > + }
> > > > +
> > > > + err = enetc4_pf_struct_init(si);
> > > > + if (err)
> > > > + goto err_pf_struct_init;
> > > > +
> > > > + pf = enetc_si_priv(si);
> > > > + err = enetc4_pf_init(pf);
> > > > + if (err)
> > > > + goto err_pf_init;
> > > > +
> > > > + pinctrl_pm_select_default_state(dev);
> > > > + enetc_get_si_caps(si);
> > > > + err = enetc4_pf_netdev_create(si);
> > > > + if (err)
> > > > + goto err_netdev_create;
> > > > +
> > > > + return 0;
> > > > +
> > > > +err_netdev_create:
> > > > +err_pf_init:
> > > > +err_pf_struct_init:
> > > > +err_enetc_pci_probe:
> > > > + enetc_pci_remove(pdev);
> > >
> > > you can use devm_add_action_or_reset() to remove these goto labels.
> > >
> > Subsequent patches will have corresponding processing for these
> > labels, so I don't want to add too many devm_add_action_or_reset ().
