Compatible and clock names did not match the existing binding.
So set the correct values and re-order+rename the clocks.
It looks like no rk3036 board did use the spi controller so far,
so this was never detected on a running device yet.
Fixes: f629fcfab2cd ("ARM: dts: rockchip: support the spi for rk3036")
Cc: Caesar Wang <wxt@xxxxxxxxxxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm/boot/dts/rockchip/rk3036.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 09371f07d7b4..63b9912be06a 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -553,11 +553,11 @@ i2c0: i2c@20072000 {
};
spi: spi@20074000 {
- compatible = "rockchip,rockchip-spi";
+ compatible = "rockchip,rk3036-spi";
reg = <0x20074000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
- clock-names = "apb-pclk","spi_pclk";
+ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+ clock-names = "spiclk", "apb_pclk";
dmas = <&pdma 8>, <&pdma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
--
2.43.0
