The patch adding display support for the pinephone pro introduced two
regulators that contain pinctrl-names props but no pinctrl-assignments.
Looks like someone forgot the pinctrl settings, so remove the orphans
for now, until that changes.
Fixes: 3e987e1f22b9 ("arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro")
Cc: Martijn Braam <martijn@xxxxxxxxx>
Cc: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Cc: Ondrej Jirman <megi@xxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 1a44582a49fb..09a016ea8c76 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -166,7 +166,6 @@ vcc1v8_lcd: vcc1v8-lcd {
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
};
/* MIPI DSI panel 2.8v supply */
@@ -178,7 +177,6 @@ vcc2v8_lcd: vcc2v8-lcd {
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc3v3_sys>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
};
vibrator {
--
2.43.0
