Re: [PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 04, 2024 at 02:08:49PM GMT, srinivas.kandagatla@xxxxxxxxxx wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> 
> Trackpad HID device on T14s could be found on two possible slave addresses
> (hid@15 and hid@2c) on i2c0 instance.
> With the current state of DT boot, there is no way to patch the device
> tree at runtime during boot. This, however results in non-functional
> trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
> slave address.
> 
> This patch adds hid@2c device along with hid@15 to get it working on
> both the variants. This should work as i2c-hid driver will stop
> probing the device if there is nothing on the slave address, we can
> actually keep both devices enabled in DT, and i2c-hid driver will
> only probe the existing one.
> 
> The only problem is that we cannot setup pinctrl in both device nodes,
> as two devices with the same pinctrl will cause pin conflict that makes
> the second device fail to probe.  Let's move the pinctrl state up to
> parent node along with the parent pinctrl to solve this problem.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> 
> Changes since v2:
> - updated commit log
> - added missing parent pinctrl
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux