Add an overlay file to enable I3C support on the i.MX93, replacing I2C1
with I3C. I3C is compatible with I2C, but it has not yet been enabled in
arm64's defconfig. This overlay allows users to conveniently utilize I3C
on the imx93-9x9-qsb platform until I3C and its driver become more mature
and ready for full switch to I3C.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
change from v1 to v2
- update to 2024
- drop imx93-clock.h
- use irq.h
---
arch/arm64/boot/dts/freescale/Makefile | 4 ++
.../boot/dts/freescale/imx93-9x9-qsb-i3c.dtso | 72 +++++++++++++++++++
2 files changed, 76 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 9d3df8b218a2e..032f07adc0c53 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -240,6 +240,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
+
+imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
new file mode 100644
index 0000000000000..3fe6209a34236
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&lpi2c1 {
+ status = "disabled";
+};
+
+&i3c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i3c1>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ i2c-scl-hz = <400000>;
+ status = "okay";
+
+ tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&usb1_drd_sw {
+ remote-endpoint = <&typec1_dr_sw>;
+};
+
+&iomuxc {
+ pinctrl_i3c1: i3c1grp {
+ fsl,pins = <
+ MX93_PAD_I2C1_SCL__I3C1_SCL 0x40000186
+ MX93_PAD_I2C1_SDA__I3C1_SDA 0x40000186
+ >;
+ };
+};
--
2.34.1
