[PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit intends to add the old BMP085 sensor to the new IRQ interface
of the driver for consistence. No functional changes intended.

The BMP085 sensor is equivalent with the BMP180 with the only difference of
BMP085 having an extra interrupt pin to inform about an End of Conversion.

Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
---
 drivers/iio/pressure/bmp280-core.c | 62 +++++++++++++++++++++++-------
 drivers/iio/pressure/bmp280-i2c.c  |  4 +-
 drivers/iio/pressure/bmp280-spi.c  |  4 +-
 drivers/iio/pressure/bmp280.h      |  1 +
 4 files changed, 53 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index c37c56446183..948d11c6912f 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -3065,13 +3065,16 @@ static irqreturn_t bmp085_eoc_irq(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static int bmp085_fetch_eoc_irq(struct device *dev,
-				const char *name,
-				int irq,
-				struct bmp280_data *data)
+static int bmp085_trigger_probe(struct iio_dev *indio_dev)
 {
+	struct bmp280_data *data = iio_priv(indio_dev);
+	struct device *dev = data->dev;
 	unsigned long irq_trig;
-	int ret;
+	int ret, irq;
+
+	irq = fwnode_irq_get(dev_fwnode(data->dev), 0);
+	if (irq < 0)
+		return dev_err_probe(data->dev, irq, "No interrupt found.\n");
 
 	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
 	if (irq_trig != IRQF_TRIGGER_RISING) {
@@ -3081,13 +3084,8 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 
 	init_completion(&data->done);
 
-	ret = devm_request_threaded_irq(dev,
-			irq,
-			bmp085_eoc_irq,
-			NULL,
-			irq_trig,
-			name,
-			data);
+	ret = devm_request_irq(dev, irq, bmp085_eoc_irq, irq_trig,
+			       indio_dev->name, data);
 	if (ret) {
 		/* Bail out without IRQ but keep the driver in place */
 		dev_err(dev, "unable to request DRDY IRQ\n");
@@ -3098,6 +3096,44 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 	return 0;
 }
 
+/* Identical to bmp180_chip_info + bmp085_trigger_probe */
+const struct bmp280_chip_info bmp085_chip_info = {
+	.id_reg = BMP280_REG_ID,
+	.chip_id = bmp180_chip_ids,
+	.num_chip_id = ARRAY_SIZE(bmp180_chip_ids),
+	.regmap_config = &bmp180_regmap_config,
+	.start_up_time = 2000,
+	.channels = bmp280_channels,
+	.num_channels = ARRAY_SIZE(bmp280_channels),
+	.avail_scan_masks = bmp280_avail_scan_masks,
+
+	.oversampling_temp_avail = bmp180_oversampling_temp_avail,
+	.num_oversampling_temp_avail =
+		ARRAY_SIZE(bmp180_oversampling_temp_avail),
+	.oversampling_temp_default = 0,
+
+	.oversampling_press_avail = bmp180_oversampling_press_avail,
+	.num_oversampling_press_avail =
+		ARRAY_SIZE(bmp180_oversampling_press_avail),
+	.oversampling_press_default = BMP180_MEAS_PRESS_8X,
+
+	.temp_coeffs = bmp180_temp_coeffs,
+	.temp_coeffs_type = IIO_VAL_FRACTIONAL,
+	.press_coeffs = bmp180_press_coeffs,
+	.press_coeffs_type = IIO_VAL_FRACTIONAL,
+
+	.chip_config = bmp180_chip_config,
+	.read_temp = bmp180_read_temp,
+	.read_press = bmp180_read_press,
+	.read_calib = bmp180_read_calib,
+	.set_mode = bmp180_set_mode,
+	.wait_conv = bmp180_wait_conv,
+
+	.trigger_probe = bmp085_trigger_probe,
+	.trigger_handler = bmp180_trigger_handler,
+};
+EXPORT_SYMBOL_NS(bmp085_chip_info, IIO_BMP280);
+
 static int bmp280_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct bmp280_data *data = iio_priv(indio_dev);
@@ -3269,8 +3305,6 @@ int bmp280_common_probe(struct device *dev,
 	 * so we look for an IRQ if we have that.
 	 */
 	if (irq > 0) {
-		if (chip_id == BMP180_CHIP_ID)
-			ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (data->chip_info->trigger_probe)
 			ret = data->chip_info->trigger_probe(indio_dev);
 		if (ret)
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 5c3a63b4327c..2f7b25984c7b 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -27,7 +27,7 @@ static int bmp280_i2c_probe(struct i2c_client *client)
 }
 
 static const struct of_device_id bmp280_of_i2c_match[] = {
-	{ .compatible = "bosch,bmp085", .data = &bmp180_chip_info },
+	{ .compatible = "bosch,bmp085", .data = &bmp085_chip_info },
 	{ .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
 	{ .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
 	{ .compatible = "bosch,bme280", .data = &bme280_chip_info },
@@ -38,7 +38,7 @@ static const struct of_device_id bmp280_of_i2c_match[] = {
 MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
 
 static const struct i2c_device_id bmp280_i2c_id[] = {
-	{"bmp085", (kernel_ulong_t)&bmp180_chip_info },
+	{"bmp085", (kernel_ulong_t)&bmp085_chip_info },
 	{"bmp180", (kernel_ulong_t)&bmp180_chip_info },
 	{"bmp280", (kernel_ulong_t)&bmp280_chip_info },
 	{"bme280", (kernel_ulong_t)&bme280_chip_info },
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index d18549d9bb64..49aa8c2cd85b 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -114,7 +114,7 @@ static int bmp280_spi_probe(struct spi_device *spi)
 }
 
 static const struct of_device_id bmp280_of_spi_match[] = {
-	{ .compatible = "bosch,bmp085", .data = &bmp180_chip_info },
+	{ .compatible = "bosch,bmp085", .data = &bmp085_chip_info },
 	{ .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
 	{ .compatible = "bosch,bmp181", .data = &bmp180_chip_info },
 	{ .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
@@ -126,7 +126,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
 MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
 
 static const struct spi_device_id bmp280_spi_id[] = {
-	{ "bmp085", (kernel_ulong_t)&bmp180_chip_info },
+	{ "bmp085", (kernel_ulong_t)&bmp085_chip_info },
 	{ "bmp180", (kernel_ulong_t)&bmp180_chip_info },
 	{ "bmp181", (kernel_ulong_t)&bmp180_chip_info },
 	{ "bmp280", (kernel_ulong_t)&bmp280_chip_info },
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 0c32b6430677..e0e47bf22472 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -535,6 +535,7 @@ struct bmp280_chip_info {
 };
 
 /* Chip infos for each variant */
+extern const struct bmp280_chip_info bmp085_chip_info;
 extern const struct bmp280_chip_info bmp180_chip_info;
 extern const struct bmp280_chip_info bmp280_chip_info;
 extern const struct bmp280_chip_info bme280_chip_info;
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux