Re: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 23/08/2024 18:00, Laurent Pinchart wrote:
Hi Biju,

On Fri, Aug 23, 2024 at 01:52:14PM +0000, Biju Das wrote:
On Friday, August 23, 2024 2:15 PM, Laurent Pinchart wrote:
On Thu, Aug 22, 2024 at 05:23:13PM +0100, Biju Das wrote:
This patch series aims to add support for RZ/G2UL DU.

The LCD controller is composed of Frame Compression Processor (FCPVD),
Video Signal Processor (VSPD), and Display Unit (DU).

The output of LCDC is connected display parallel interface (DPI) and
supports a maximum resolution of WXGA along with 2 RPFs to support the
blending of two picture layers and raster operations (ROPs)

It is similar to LCDC IP on RZ/G2L SoCs, but does not have DSI interface.

v3->v4:
  * Restored the ports property for RZ/G2UL and described port@0 for the
    DPI interface in bindings patch.
  * Restored tags from Geert and Conor as the change is trivial
    (Replaced port 1->0 from v2).
  * Used "&" instead of "==" in rzg2l_du_start_stop() for scalability.
  * Restored port variable in struct rzg2l_du_output_routing
  * Updated rzg2l_du_encoders_init() to handle port based on hardware indices.
  * Restored ports property in du node and used port@0 for connected
    DPI interface.
v2->v3:
  * Split patch series based on subsystem from DU patch series [1].
  * Replaced ports->port property for RZ/G2UL as it supports only DPI
    and retained ports property for RZ/{G2L,V2L} as it supports both DSI
    and DPI output interface.
  * Added missing blank line before example.
  * Dropped tags from Conor and Geert as there are new changes in bindings
  * Avoided the line break in rzg2l_du_start_stop() for rstate.
  * Replaced port->du_output in  struct rzg2l_du_output_routing and
    dropped using the port number to indicate the output type in
    rzg2l_du_encoders_init().
  * Updated rzg2l_du_r9a07g043u_info and rzg2l_du_r9a07g044_info.

  [1] https://lore.kernel.org/all/20240709135152.185042-1-biju.das.jz@xxxxxxxxxxxxxx/
v1->v2:
  * Updated cover letter header "DU IP->Display Unit".
  * Updated commit description related to non ABI breakage for patch#3.
  * Added Ack from Conor for binding patches.

Biju Das (4):
   dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
   drm: renesas: rz-du: Add RZ/G2UL DU Support

The first two patches look good to me. Do you have access to drm-misc, will you push them yourself, or
do you expect a maintainer to pick them up ?

I don’t have access to drm-misc. I expect a maintainer to pick it up(Maybe via rcar-du tree or
drm-misc tree), or else if it is ok, what is the procedure to get access for drm-misc tree??

You can find instructions to request drm-misc commit access at
https://drm.pages.freedesktop.org/maintainer-tools/committer/commit-access.html

Tomi, to avoid delays, could you push the first two patches to drm-misc
?

I have pushed the first two patches.

 Tomi





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux