From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx> Convert the Cirrus Logic CS4271 audio CODEC bindings to DT schema. Cc: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx> Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx> Link: https://lore.kernel.org/all/20240715-ep93xx-v11-0-4e924efda795@xxxxxxxxxxx --- This is complementary patch to ep93xx DT conversion series. Based on "ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema" patch. --- .../devicetree/bindings/sound/cirrus,cs4271.yaml | 91 ++++++++++++++++++++++ Documentation/devicetree/bindings/sound/cs4271.txt | 57 -------------- 2 files changed, 91 insertions(+), 57 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml new file mode 100644 index 000000000000..dd104483ab81 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs4271.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS4271 audio CODEC + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx> + - Nikita Shubin <nikita.shubin@xxxxxxxxxxx> + +description: + The CS4271 is a stereo audio codec. This driver supports both the I2C + and the SPI bus. + +allOf: + - $ref: dai-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: cirrus,cs4271 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + '#sound-dai-cells': + const: 0 + + reset-gpio: + description: + This pin will be deasserted before communication to the codec starts. + maxItems: 1 + + va-supply: + description: Analog power supply. + + vd-supply: + description: Digital power supply. + + vl-supply: + description: Serial Control Port power supply. + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + + cirrus,amuteb-eq-bmutec: + description: + When given, the Codec's AMUTEB=BMUTEC flag is enabled. + type: boolean + + cirrus,enable-soft-reset: + description: | + The CS4271 requires its LRCLK and MCLK to be stable before its RESET + line is de-asserted. That also means that clocks cannot be changed + without putting the chip back into hardware reset, which also requires + a complete re-initialization of all registers. + + One (undocumented) workaround is to assert and de-assert the PDN bit + in the MODE2 register. This workaround can be enabled with this DT + property. + + Note that this is not needed in case the clocks are stable + throughout the entire runtime of the codec. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + cs4271: codec@0 { + compatible = "cirrus,cs4271"; + reg = <0>; + reset-gpio = <&gpio0 1 0>; + }; + }; + +... \ No newline at end of file diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt deleted file mode 100644 index 6e699ceabacd..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4271.txt +++ /dev/null @@ -1,57 +0,0 @@ -Cirrus Logic CS4271 DT bindings - -This driver supports both the I2C and the SPI bus. - -Required properties: - - - compatible: "cirrus,cs4271" - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: the i2c address - - -Optional properties: - - - reset-gpio: a GPIO spec to define which pin is connected to the chip's - !RESET pin - - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag - is enabled. - - cirrus,enable-soft-reset: - The CS4271 requires its LRCLK and MCLK to be stable before its RESET - line is de-asserted. That also means that clocks cannot be changed - without putting the chip back into hardware reset, which also requires - a complete re-initialization of all registers. - - One (undocumented) workaround is to assert and de-assert the PDN bit - in the MODE2 register. This workaround can be enabled with this DT - property. - - Note that this is not needed in case the clocks are stable - throughout the entire runtime of the codec. - - - vd-supply: Digital power - - vl-supply: Logic power - - va-supply: Analog Power - -Examples: - - codec_i2c: cs4271@10 { - compatible = "cirrus,cs4271"; - reg = <0x10>; - reset-gpio = <&gpio 23 0>; - vd-supply = <&vdd_3v3_reg>; - vl-supply = <&vdd_3v3_reg>; - va-supply = <&vdd_3v3_reg>; - }; - - codec_spi: cs4271@0 { - compatible = "cirrus,cs4271"; - reg = <0x0>; - reset-gpio = <&gpio 23 0>; - spi-max-frequency = <6000000>; - }; - --- base-commit: 5be63fc19fcaa4c236b307420483578a56986a37 change-id: 20240826-cs4271-yaml-e3890230dbbf Best regards, -- Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
